Kobe Range Hoods CX1836GS installation instructions Operating Instruction

Page 10

OPERATING INSTRUCTION

This KOBE hood is equipped with a four-button control panel with LED lights, one p centrifugal squirrel cage with stainless steel filter, two bright 12-volt 20-watt one oil container.

The four control buttons are Power Control (On/Off), Speed Control (Low & High Spe Light Control. Refer to Figure 12.

Figure 12

Light Control

Speed Control

(High Speed)

Turn On:

(All buttons operate independently)

-Press Power Control (On/Off) to turn on to the prior selected speed or halogen lights.

-Select the desire speed from the Speed Control button.

-Press Light Control button to turn halogen light on.

Turn Off:

-Press Power Control (On/Off) button to shut down all power immediately.

-Press Light Control to turn halogen light off.

-Press Speed Control to turn the speed off.

8

Image 10

Contents Kobe Brand Range Hood Read and Save These Instructions Please Read this Section Carefully Before Installation Important Safety InstructionsActivating any switch on may cause ignition or an explosion What to Do In The Event Of a Range Top Grease FireComponents of Package Preparations before Installation InstallationPlease Read Entire Instructions Before Proceeding Page Wiring to Power Supply ReleasingMake sure to leave this manual for the homeowner Operating Instruction Maintenance Replace protective cover Plug in range hood Specifications All measurements in are millimeters Measurement & DiagramViewing Down from the TOP Viewing from the Side Parts List Model NO. CX1836GSModel NO. CX1836GS Circuit Diagram Disclaimer Claims will not be Accepted After the Allocated DaysTWO-YEAR Warranty Service Period WarrantyWarranty Certificate This warranty applies only Within U.S.A. and CanadaConsequential Damage ServiceMAY not Apply to YOU Implied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationRegister Your Product Model No