Kobe Range Hoods IN2636SQB-1 Trouble Shooting, Issue Possible Cause Solution

Page 23

TROUBLE SHOOTING

Issue

Possible Cause

Solution

After Installation,

The power is not on.

Make sure the circuit breaker and the unit’s power is

both motors and

 

ON. Use a voltage meter to check the power supply.

lights are not

The wire connection is not secure.

Check and tighten wire connection.

working.

The control panel and processor board

Check wire continuity from control panel to processor

 

wiring are disconnected.

board.

 

The motor transformer is defective.

Check the power input and power output on the

 

 

motor transformer.

 

 

If it’s needed, replace the motor transformer.

 

 

 

 

The control panel and processor board is

Replace the control panel or processor board.

 

defective.

 

Lights are

The motor(s) is defective.

Replace the motor.

working, but

The capacitor(s) is defective.

Replace capacitor(s).

motor(s) is not.

The control panel or processor board is

Replace the control panel or processing board.

 

defective.

 

The range

The blower system is not secure.

Tighten the turbine impeller/squirrel cage and air

hood is

 

chamber.

vibrating.

The turbine impeller/squirrel cage is

Replace the turbine impeller/squirrel cage.

 

not balanced.

 

 

Hood is not secured in place.

Check the installation of hood, tighten the

 

 

mounting bracket.

The range

The range hood is installed outside of

Adjust the clearance between the range hoods

hood is not

the manufacture recommended

and cook top to 27” to 30”. For Island range

venting out

clearance.

hood, the clearance between the range hoods

correctly.

 

and cook top is 30” to 36”.

 

There is no make-up air inside the

Open the window to enhance the performance

 

house.

of the range hood by creating a sufficient make-

 

 

up air.

 

Obstacle blocking the pipe work.

Remove all obstacles from the duct work.

 

 

 

 

The pipe size is smaller than the

Change the ducting according to the

 

suggested pipe size.

manufacture suggestion.

Cold air is

The pipe connection is not properly

Check the pipe installation.

coming into the

sealed.

 

home.

The damper is not properly installed or

Check the damper installation.

 

is missing from the installation.

 

 

The damper is not installed.

By installing the damper, it will help to eliminate

 

 

air backflow.

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Kobe Brand Range Hood Page English English Read and Save These Instructions Range TOP Grease Fire Important Safety InstructionsPlease Read this Section Carefully Before Installation What to Do If You Smell Gas Liner Sold Separately Components of PackageRange Hood Box For Under the Cabinet InstallationCustom Hood Preparation Preparation Before InstallationLiner Installation Duct Work Installation Wiring to Power SupplyHood Installation Hood Preparation Before InstallationFinal Assembly Operating Instructions Page Page To Clean Hood Surface MaintenanceOptional Accessories SpecificationsMeasurements & Diagrams Page Model no IN2636SQB-1 Parts ListOptional Liner Sold Separately Model NO. IN2636SQB-1 Circuit DiagramIssue Possible Cause Solution Trouble ShootingClaims will not be Accepted After the Allocated Days DisclaimerWarranty Certificate WarrantyConsequential Damage ServiceRegister Your Product Product RegistrationFrench Consignes DE Sécurité Importantes Que faire en cas dun incendie de graisse sur la cuisinière Contenu DE L’EMBALLAGE Prise de mesures avant l’installation Hotte Installée Sous UNE Armoire TableauInstallation de l’insert Consignes DE Sécurité Avertissement Assemblage final Mode D’EMPLOI Des lampes passe de élevée, à basse puis à éteinte Photo Entretien Préventif Dimensions DE LA Hotte Mesures ET Schémas Page No DE Pièce Liste DES PiècesRevêtement optionnel vendu séparément No DE Modèle IN2636SQB-1 Schéma DE CâblageProblème Cause probable Solution Avis DE NON-RESPONSABILITÉ Certificat DE Garantie GarantieDommages Indirects Inscrire LES Renseignements Suivants Pour NOS Dossiers Enregistrement DU ProduitSpanish LEA Y Conserve Estas Instrucciones Advertencia Para Reducir EL Riesgo QUE Ocurran Lesiones Instrucciones Importantes DE SeguridadQué Hacer si Siente Olor a Gas Cubierta Vendida por Separado Componentes DEL PaqueteCaja de Campana de Extracción Para Instalación Debajo DE UN Gabinete Tabla InstalaciónInstalación de la Cubierta Preparación Antes de la InstalaciónPreparación de la Campana Personalizada Instalación de la Red de Conductos Cableado Hacia la Fuente de AlimentaciónInstalación de la Campana Preparación de la Campana antes de la InstalaciónFigura Ensamblaje FinalInstrucciones DE Operación Page Page Mantenimiento Ancho X Profundidad X Alto EspecificacionesMedidas Y Diagramas Page Modelo no IN2636SQB-1 Listado DE PiezasCubierta Opcional Vendida por Separado Modelo NO. IN2636SQB-1 Diagrama DE CircuitoProblema Posible Causa Solución Cláusula DE Exención Certificado DE Garantía GarantíaDaños Emergentes Registre su Producto Registro DEL ProductoInformation subject to change without notice VER.091209

IN2636SQB-1 specifications

The Kobe Range Hood IN2636SQB-1 stands out as an exceptional appliance designed for modern kitchens, combining form, function, and advanced technology. This range hood is tailored for those who seek a blend of efficiency, style, and durability, making it a sought-after choice for both professional chefs and home cooking enthusiasts.

One of the primary features of the IN2636SQB-1 is its powerful yet quiet operation. Equipped with a high-performance internal blower, this range hood operates at a maximum airflow of 600 CFM, effectively removing smoke, odors, and grease particles from the air while maintaining an unobtrusive noise level. This balance ensures that conversations can flow smoothly even while the hood is in operation.

The IN2636SQB-1 employs stainless steel construction, which not only adds a sleek and modern aesthetic to any kitchen but also promises longevity and easy maintenance. The surface is resistant to stains and corrosion, allowing for effortless cleaning and providing a robust solution to kitchen management.

An important characteristic of this range hood is its multi-speed control setting. Users can easily adjust the fan speed to match the cooking needs, whether frying, boiling, or simply simmering. This flexibility is crucial for optimizing performance and energy efficiency while also ensuring comfort in the kitchen.

Additionally, the Kobe Range Hood comes equipped with bright LED lights that illuminate the cooking area. This feature enhances visibility and safety while preparing meals, highlighting ingredients and ensuring precision in cooking. The lights also have a long lifespan, which contributes to lower maintenance and replacement costs.

Furthermore, the IN2636SQB-1 includes baffle filters that are designed for superior grease capture. These filters are dishwasher-safe, making cleanup a breeze while ensuring that the unit operates at peak performance.

Installation options are versatile, as this model is designed for both ducted and ductless options, accommodating various kitchen layouts. The IN2636SQB-1 is also compatible with a carbon filter kit for ductless installations, making it adaptable to any home setting.

In summary, the Kobe Range Hood IN2636SQB-1 offers a compelling package of high performance, elegant design, and thoughtful features, making it a fantastic addition to any kitchen. Its powerful ventilation, easy maintenance, and modern aesthetics make it an industry leader in range hoods. Both practical and stylish, it exemplifies what today's homeowners seek in kitchen appliances.
Top Page Image Contents