Kobe Range Hoods CH0136SQB (36") Stand Alone Installation, Hood Preparation Before Installation

Page 12

STAND ALONE INSTALLATION

***Follow these installations only if installing with an optional duct cover:

Preparation Before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

•Decide the location of the venting pipe from the hood to the outside. Refer to Figure 9.

•A straight, short vent run will allow the hood to perform more efficiently.

•Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

•Use duct tape to seal the joints between pipe sections.

•If necessary, prepare back wall frame with cross framing lumber for secure installation.

•Using references in Table 2 and Measurements and Diagrams on pages 19-20, decide the level of the lumber. Refer to Figure 10.

Hood Preparation Before Installation

•Temporarily wire the hood to test for proper operation before installing.

•Important: Peel protective film off the hood and the duct cover (if any).

•Attach ducting transition to hood exhaust with ten (3/16” x 3/8”) screws (provided). Refer to Figure 11.

•Use eight (3/16” x 3/8”) screws (provided) to attach the two hood-mounting brackets (provided) to the back of the hood. Refer to Figure 12.

Hood Installation

CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

1.Using references in Table 2 and Measurements and Diagrams on pages 19-20, mark the leveling point of the hood. Position two mounting screws (not provided) on the wall, leaving 1/8” away from the wall. Refer to Figure 13

Figure 9

Figure 10

Figure 11

Figure 12

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Kobe Brand Range Hood Page Contents Read and Save These InstructionsPage Page Components of Package Must keep all material for returns or refundsInstallation For Under the CabinetFor Stand Alone with Optional Duct Cover Installation Table of Contents Under the Cabinet Installation Preparation Before InstallationF E T Y W a R N I N G Page Stand Alone Installation Hood Preparation Before InstallationSafety Warning Duct Cover Installation Operating Instructions Speed Control Maintenance To Clean Hood SurfaceHalogen Light Unit MAY be HOT! Wait Until Unit is Cool Specifications Measurements & Diagrams For Under the Cabinet Page For Stand Alone with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Parts List Description MODEL/SIZEOptional Duct Cover Sold Separately Blower Assembly Electrical Assembly Switch Assembly Circuit Diagram Model NO. CH0130SQB CH0136SQB Model NO. CH0142SQB CH0148SQB Claims will not be Accepted After the Allocated Days Warranty Warranty Certificate TWO-YEAR Warranty Service PeriodConditions Service Consequential DamageImplied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your Record070530

CH0148SQB (48"), CH0142SQB (42"), CH0130SQB (30"), CH0136SQB (36") specifications

Kobe Range Hoods has established itself as a leading brand in kitchen ventilation systems, with products designed to enhance the cooking experience while marrying style and functionality. Among its impressive lineup are the CH0142SQB (42"), CH0136SQB (36"), CH0130SQB (30"), and CH0148SQB (48") range hoods, each tailored to meet the diverse needs of modern kitchens.

One of the standout features of the CH0142SQB, CH0136SQB, CH0130SQB, and CH0148SQB models is their powerful suction capabilities. Utilizing a powerful motor, each unit delivers exceptional airflow, effectively capturing smoke, steam, and odors generated during cooking. This ensures a clean and comfortable kitchen environment, promoting better air quality for the home.

In addition to robust performance, these range hoods come equipped with innovative technologies. The baffle filters are a key component, known for their durability and effectiveness. Made from stainless steel, these filters are not only easy to clean but also designed to maximize airflow while minimizing noise levels, creating a quieter cooking environment. Each model features a three-speed blower that allows users to select the appropriate level of ventilation based on cooking intensity. This versatility caters to a range of cooking styles, from everyday meal preparation to gourmet cooking sessions.

Aesthetically, the Kobe range hoods boast a sleek and modern design, making them a stylish addition to any kitchen. Available in various sizes—42", 36", 30", and 48"—they can fit seamlessly into diverse kitchen layouts and complement a wide range of cabinetry styles. The stainless steel finish gives each model a contemporary look while also providing durability and ease of maintenance.

Moreover, these range hoods are equipped with LED lighting, offering bright illumination of the cooking surface below. This enhances visibility while preparing meals, ensuring that users can maintain precision and safety during cooking.

In terms of installation, the Kobe Range Hoods are designed for easy setup, with options available for both ducted and ductless installations, making them adaptable to different home configurations. Each unit delivers a combination of efficiency, style, and user-friendliness, positioning them as an excellent choice for anyone looking to upgrade their kitchen ventilation solution.

Overall, the CH0142SQB, CH0136SQB, CH0130SQB, and CH0148SQB models exemplify Kobe Range Hoods' commitment to quality and innovation, making them a top choice for chefs and home cooks alike.
Top Page Image Contents