Kobe Range Hoods CH2236SQ, CH2230SQ Under the Cabinet Installation Rear Vent

Page 10

UNDER THE CABINET INSTALLATION – REAR VENT

Preparation before installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

-Decide the location of the venting pipe from the hood to the outside. Refer to Figure 6.

-A straight, short venting run will allow the hood to perform more efficiently.

-Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

-Temporarily wire the hood to test for proper operation before installing.

-Peel protective film off the hood (if any).

-For installing under the cabinet with recessed bottom, attach 4-inch wide wood filler strips (not included) on each side. Refer to Figure 7.

-Measure and create access opening for electrical wires under the cabinet or access opening for the electrical wires at the rear of the hood.

-Remove the screws on the vent cover (rear) and cut along the line of the inner vent cover (rear) opening. Refer to Figure 8.

-Cut the vent cover (rear) opening and reverse to the other side. Refer to Figure 9. Reattach the vent cover (rear).

Figure 6

Inner Vent

Cover (Rear)

Figure 8

Hood Installation

Figure 7

Reversed

Vent Cover

(Rear)

Figure 9

CAUTION: If required to move the cooking range to install the hood, turn off the power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Kobe Brand Range Hood Contents Read and Save These InstructionsPlease Read this Section Carefully Before Installation Important Safety InstructionsPage Components of Package For Under the Cabinet InstallationFor Stand Alone with Optional Duct Cover Safety Warning Under the Cabinet Installation TOP Vent Page Under the Cabinet Installation Rear Vent Page Stand Alone Installation TOP Vent Page Page Stand Alone Installation Rear Vent Page Page Wiring to Power Supply Operating Instructions Maintenance To Clean Hood SurfaceTo Replace Light Bulb Specifications Halogen LightsMeasurements & Diagrams Hood-Mounting Bracket Duct Cover-Mounting Bracket Parts List Model NO. CH2230SQModel NO. CH2230SQ Circuit Diagram Disclaimer Claims will not be Accepted After the Allocated DaysTWO-YEAR Warranty Service Period WarrantyWarranty Certificate ConditionsConsequential Damage ServiceImplied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your Record
Related manuals
Manual 31 pages 21.17 Kb

CH2230SQ, CH2236SQ specifications

Kobe Range Hoods is a reputable brand known for its commitment to performance, durability, and elegance in kitchen ventilation. Among its stellar offerings are the CH2230SQ and CH2236SQ models, which stand out for their exceptional features and innovative technologies, making them ideal for both home cooks and professional chefs.

The CH2230SQ and CH2236SQ are designed to complement various kitchen styles with their sleek stainless steel finishes and modern square design. These range hoods offer an elegant aesthetic without compromising functionality. The hoods come in two sizes, allowing homeowners to select the perfect fit for their cooking spaces.

One of the main features of these range hoods is their powerful ventilation performance. Both models are equipped with a high-performance 3-speed blower that can achieve an impressive airflow of up to 600 CFM. This ensures that cooking odors, smoke, and grease are efficiently removed from the kitchen, maintaining a clean and pleasant cooking environment.

In terms of technology, the CH2230SQ and CH2236SQ boast a quiet operation. With noise levels as low as 40 decibels at low speeds, these hoods maintain a tranquil kitchen atmosphere, allowing conversations to flow undisturbed while cooking. This is especially beneficial for open-concept homes where the kitchen is integrated into living spaces.

The models are also designed with user-friendliness in mind. They feature easy-to-use push-button controls that simplify operation, allowing users to adjust the fan speed and lighting with ease. Additionally, the hoods come equipped with energy-efficient LED lighting. This not only enhances visibility during cooking but also consumes less energy compared to traditional bulbs, making it an eco-friendly choice.

Another notable characteristic is the baffle filter design. The stainless steel baffle filters are not only durable but also effectively trap grease and other particles. They are dishwasher-safe, making maintenance a breeze, as users can conveniently clean them without hassle.

In summary, the Kobe Range Hoods CH2230SQ and CH2236SQ models offer a combination of powerful ventilation, quiet operation, user-friendly controls, energy-efficient lighting, and easy maintenance. These hoods are perfect for anyone looking to elevate their kitchen experience while ensuring a healthy and comfortable cooking atmosphere. With Kobe's commitment to quality, these range hoods are an investment in both performance and style for any modern kitchen.
Top Page Image Contents