Kobe Range Hoods CH2230SQ, CH2236SQ installation instructions Stand Alone Installation Rear Vent

Page 15

STAND ALONE INSTALLATION – REAR VENT

***This installation only applied with the purchase of a duct cover (Model No. CH1120DC).

Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

-Decide the location of the venting pipe from the hood to the outside. Refer to Figure 21.

-A straight, short venting run will allow the hood to perform more efficiently.

-Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

-Use duct tape to seal the joints between pipe sections.

-If necessary, prepare back wall frame with cross framing lumber for secure installation. Using references on Table 2 and measurements on page 21-22, decide the level of the lumber. Refer to Figure 22.

Hood Preparation before Installation

-Temporarily wire the hood to test for proper operation before installing.

-Peel protective film off the hood and the duct cover (if any).

-Remove the screws on the vent cover (rear) and cut along the line of the inner vent cover (rear) opening. Refer to Figure 23.

-Cut the vent cover (rear) opening and reverse to the other side. Refer to Figure 24.

Figure 21

Inner Vent

Cover (Rear)

Figure 22

Reversed

Vent Cover (Rear)

Figure 23

Figure 24

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Kobe Brand Range Hood Read and Save These Instructions ContentsImportant Safety Instructions Please Read this Section Carefully Before InstallationPage Components of Package Installation For Under the CabinetFor Stand Alone with Optional Duct Cover Safety Warning Under the Cabinet Installation TOP Vent Page Under the Cabinet Installation Rear Vent Page Stand Alone Installation TOP Vent Page Page Stand Alone Installation Rear Vent Page Page Wiring to Power Supply Operating Instructions To Clean Hood Surface MaintenanceTo Replace Light Bulb Halogen Lights SpecificationsMeasurements & Diagrams Hood-Mounting Bracket Duct Cover-Mounting Bracket Model NO. CH2230SQ Parts ListModel NO. CH2230SQ Circuit Diagram Claims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodService Consequential DamageImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product Registration
Related manuals
Manual 31 pages 21.17 Kb

CH2230SQ, CH2236SQ specifications

Kobe Range Hoods is a reputable brand known for its commitment to performance, durability, and elegance in kitchen ventilation. Among its stellar offerings are the CH2230SQ and CH2236SQ models, which stand out for their exceptional features and innovative technologies, making them ideal for both home cooks and professional chefs.

The CH2230SQ and CH2236SQ are designed to complement various kitchen styles with their sleek stainless steel finishes and modern square design. These range hoods offer an elegant aesthetic without compromising functionality. The hoods come in two sizes, allowing homeowners to select the perfect fit for their cooking spaces.

One of the main features of these range hoods is their powerful ventilation performance. Both models are equipped with a high-performance 3-speed blower that can achieve an impressive airflow of up to 600 CFM. This ensures that cooking odors, smoke, and grease are efficiently removed from the kitchen, maintaining a clean and pleasant cooking environment.

In terms of technology, the CH2230SQ and CH2236SQ boast a quiet operation. With noise levels as low as 40 decibels at low speeds, these hoods maintain a tranquil kitchen atmosphere, allowing conversations to flow undisturbed while cooking. This is especially beneficial for open-concept homes where the kitchen is integrated into living spaces.

The models are also designed with user-friendliness in mind. They feature easy-to-use push-button controls that simplify operation, allowing users to adjust the fan speed and lighting with ease. Additionally, the hoods come equipped with energy-efficient LED lighting. This not only enhances visibility during cooking but also consumes less energy compared to traditional bulbs, making it an eco-friendly choice.

Another notable characteristic is the baffle filter design. The stainless steel baffle filters are not only durable but also effectively trap grease and other particles. They are dishwasher-safe, making maintenance a breeze, as users can conveniently clean them without hassle.

In summary, the Kobe Range Hoods CH2230SQ and CH2236SQ models offer a combination of powerful ventilation, quiet operation, user-friendly controls, energy-efficient lighting, and easy maintenance. These hoods are perfect for anyone looking to elevate their kitchen experience while ensuring a healthy and comfortable cooking atmosphere. With Kobe's commitment to quality, these range hoods are an investment in both performance and style for any modern kitchen.
Top Page Image Contents