Kobe Range Hoods CH2230SQ, CH2236SQ installation instructions

Page 13

-If necessary, attach two rubber stands (provided) with two (4x8 mm) screws (provided) to the back of the hood.

-Attach the hood-mounting bracket to the back of the hood with nine (3/16” x 3/8”) screws (provided) as shown in Figure 16.

Hood Installation

CAUTION: If required to move the cooking range to install the hood, turn off the power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

1.Using references on Table 2 and measurements on page 21-22, mark the leveling point of the hood. Position two mounting screws (not provided) on the wall, leaving 1/8” away from the wall as shown in Figure 17.

Mounting

Screws

Figure 16

Figure 17

2.Align hood-mounting bracket to the two screws on the wall and hook hood into place. Tighten screws to secure hood to the wall. CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING.

Duct Cover Installation

3.Mark the position of the duct cover-mounting bracket. Use reference E from Table 2 and measurements on page 21-22. Attach and secure duct cover-mounting bracket with two screws (not provided). Refer to Figure 18. NOTE: Inner duct cover will cover the duct cover-mounting bracket.

4.Use aluminum or steel pipe to connect the plastic exhaust on the hood to the ductwork above. Use duct tape to make all joints secure and air tight.

5.Connect electrical wires. Refer to “Wiring to Power Supply” on page 16.

6.Slide the inner duct cover up 2 inches before sliding the entire duct cover onto the hood. Refer to Figure 19.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Kobe Brand Range Hood Read and Save These Instructions ContentsImportant Safety Instructions Please Read this Section Carefully Before InstallationPage Components of Package For Under the Cabinet InstallationFor Stand Alone with Optional Duct Cover Safety Warning Under the Cabinet Installation TOP Vent Page Under the Cabinet Installation Rear Vent Page Stand Alone Installation TOP Vent Page Page Stand Alone Installation Rear Vent Page Page Wiring to Power Supply Operating Instructions To Clean Hood Surface MaintenanceTo Replace Light Bulb Halogen Lights SpecificationsMeasurements & Diagrams Hood-Mounting Bracket Duct Cover-Mounting Bracket Model NO. CH2230SQ Parts ListModel NO. CH2230SQ Circuit Diagram Claims will not be Accepted After the Allocated Days DisclaimerWarranty Certificate WarrantyTWO-YEAR Warranty Service Period ConditionsConsequential Damage ServiceImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product Registration
Related manuals
Manual 31 pages 21.17 Kb

CH2230SQ, CH2236SQ specifications

Kobe Range Hoods is a reputable brand known for its commitment to performance, durability, and elegance in kitchen ventilation. Among its stellar offerings are the CH2230SQ and CH2236SQ models, which stand out for their exceptional features and innovative technologies, making them ideal for both home cooks and professional chefs.

The CH2230SQ and CH2236SQ are designed to complement various kitchen styles with their sleek stainless steel finishes and modern square design. These range hoods offer an elegant aesthetic without compromising functionality. The hoods come in two sizes, allowing homeowners to select the perfect fit for their cooking spaces.

One of the main features of these range hoods is their powerful ventilation performance. Both models are equipped with a high-performance 3-speed blower that can achieve an impressive airflow of up to 600 CFM. This ensures that cooking odors, smoke, and grease are efficiently removed from the kitchen, maintaining a clean and pleasant cooking environment.

In terms of technology, the CH2230SQ and CH2236SQ boast a quiet operation. With noise levels as low as 40 decibels at low speeds, these hoods maintain a tranquil kitchen atmosphere, allowing conversations to flow undisturbed while cooking. This is especially beneficial for open-concept homes where the kitchen is integrated into living spaces.

The models are also designed with user-friendliness in mind. They feature easy-to-use push-button controls that simplify operation, allowing users to adjust the fan speed and lighting with ease. Additionally, the hoods come equipped with energy-efficient LED lighting. This not only enhances visibility during cooking but also consumes less energy compared to traditional bulbs, making it an eco-friendly choice.

Another notable characteristic is the baffle filter design. The stainless steel baffle filters are not only durable but also effectively trap grease and other particles. They are dishwasher-safe, making maintenance a breeze, as users can conveniently clean them without hassle.

In summary, the Kobe Range Hoods CH2230SQ and CH2236SQ models offer a combination of powerful ventilation, quiet operation, user-friendly controls, energy-efficient lighting, and easy maintenance. These hoods are perfect for anyone looking to elevate their kitchen experience while ensuring a healthy and comfortable cooking atmosphere. With Kobe's commitment to quality, these range hoods are an investment in both performance and style for any modern kitchen.
Top Page Image Contents