To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Make sure all controls are off, and range hood is unplugged.
2.Place a
3.Gently pull defective bulb straight out and discard. Light bulbs should be 12V 20W maximum.
4.Wear a cotton glove or use a cloth to handle the replacement bulb (do not handle with bare fingers as this may shorten the life of the bulb). Push gently but securely into light socket.
NOTE: DO NOT PUSH TOO HARD AS BULB “LEGS” MAY BREAK OFF.
5.Replace light cover .
6.Turn range hood ON to test for operation.
14