Kobe Range Hoods CH0036SQB (36"), CH0030SQB (30"), CH0048SQB (48"), CH0042SQB (42") manual

Page 4

IMPORTANT SAFETY INSTRUCTIONS

- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING:

1)Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction.

2)When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.

3)Ducted fans must be vented to the outside.

a)Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT SERVICE PANEL.

b)Clean grease laden surfaces frequently. To reduce the risk of fire and to disperse air properly, make sure to vent air outside. DO NOT vent exhaust air into wall spaces, attics, crawl spaces or garages.

NOTE - This warranty is invalid without an authorized agent’s receipt or if unit is damaged due to misuse, poor installation, improper use, mistreatment, negligence or any other circumstances beyond the control of KOBE RANGE HOODS authorized agents. Any repair carried out without the supervision of KOBE RANGE HOODS authorized agents will automatically void the warranty.

-KOBE RANGE HOODS will not be held responsible for any damages to personal property or real estate or any bodily injuries whether caused directly or indirectly by the range hood.

WARNING: TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE TOP GREASE FIRE:

-Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.

-Always turn hood ON when cooking at high heat.

-Use high settings on cooking range ONLY when necessary.

-Do not leave cooking range unattended when cooking.

-Always use cookware and utensils appropriate for the type and amount of food prepared.

-Use this unit only in the manner intended by the manufacturer.

-Before servicing, switch power off at service panel and lock service panel (if possible) to prevent power from switching on accidentally.

-Clean ventilating fan frequently.

1

Image 4
Contents Kobe Brand Range Hood This page Left Purposely Blank Contents Read and Save These InstructionsPage Page Components of Package Must keep all material for returns or refundsFor Under the Cabinet InstallationFor Wall Mount with Optional Duct Cover Installation Table of Contents Under the Cabinet Installation Make Sure Hood is Secure Before ReleasingF E T Y W a R N I N G Page Wall Mount Installation Hood Preparation Before InstallationWall Duct Cover Installation Turn on Turn OFFMaintenance To Replace Light Bulb Specifications Measurements & Diagrams For Under T HE Cabinet Page Rear Knockout Holes For Wall Mount with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Parts List Optional Duct Cover Sold Separately Blower Assembly Electrical Assembly Circuit Diagram Model NO. CH0030SQB CH0036SQB Processor BoardProcessor Board Model NO. CH0042SQB CH0048SQBDisclaimer Claims will not be Accepted After the Allocated DaysWarranty Warranty CertificateTWO-YEAR Warranty Service Period ConditionsConsequential Damage ServiceImplied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your RecordThis page Left Purposely Blank VER.070430