JVC toledo installation instructions Controls

Page 33

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have ￿nished.

Right-hand tray

From the rear remove the screws securing the ￿ue grill to the hotplate tray. If the left-hand hotplate has not been removed, slacken the screws holding the left-hand tray. Remove pan support, burner head, caps and trim rings. Remove the screws holding the wok burner to the hotplate. Remove the two screws and washers holding the right-hand tray to the frame.

Press the wok burner down slightly and, taking care not to damage the wok burner electrode, slide the tray about 30 mm to right to clear the locating brackets on the right-hand side. Lift tray slightly at the front and taking care not to stress the warmer/lead junction, disconnect the leads to the warmer neon and separate the leads at the piggybacks. Withdraw the hotplate.

Reassemble in the reverse order ensuring that the leads are reconnected. When replacing the right-hand hotplate take care not to damage the ignition electrode of the wok burner.

It is important that the rear ￿xing screws are re￿tted as they from part of the cooker earthing.

On some models there is a separate plate (Fig.9-2). On others it is a tag on the cooker backsheet (Fig.9-3).

It is important that the tag is on the outside and that both ￿xing screws are ￿tted.

Check for correct burner operation.

2.5To Replace a Hotplate Burner

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the hotplate tray (see 2.1). The burners (except the right-hand wok burner) are mounted on support struts. For these burners, disconnect the burner feed pipes at the burner. Remove the screws at the front and rear holding the support struts. Lift the strut and burners clear. The burners are ￿xed to the support struts with two screws. Remove the appropriate burner and ￿t the new one.

Reassemble in the reverse order. Check that the burner operation is satisfactory.

Right-hand Wok Burner

Disconnect the burner feed pipes at the burner.

Fit the new one and reassemble in reverse order. Check that the burner operation is satisfactory.

2.6To Change the Warmer Neon

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove right-hand hotplate (see 2.1). Carefully turn the hotplate upside down on a suitable ￿at surface. Remove the 2 screws holding neon bracket to Warmer frame. Fit the new neon and bracket assembly.

Reassemble in the reverse order and check for correct operation.

2.2To Replace the Hotplate Control Taps

DISCONNECT FROM THE ELECTRICITY SUPPLY.

BEFORE SERVICING ANY GAS CARRYING

nn

COMPONENTS, TURN OFF THE GAS SUPPLY.

Remove the control panel and hotplate (see 1.1 & 2.1). Unplug the FSD lead from the rear of the tap. Undo the compression ￿tting at the rear of the tap and remove the ￿xings that secure the tap to the gas rail. Disconnect the ignition switch wiring.

Remove the tap. Remove and discard the gasket seal. Fit the new gasket seal to the replacement tap. Reassemble in reverse order. Check that the appliance is gas sound.

Verify the hotplate ignition.

2.3To Change a Hotplate Burner Injector

Remove the burner cap and head. Remove the old injector.

Fit the new injector. Reassemble in the reverse order. Check the appliance is gas sound.

2.4To Replace a Hotplate Burner Electrode

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Lift o￿ pan supports and remove the burner cap. Remove the screw holding the electrode. Pull the electrode vertically up su￿ciently to grip the lead between thumb and fore￿nger.

Pull o￿ the electrode, but keep hold of the lead. Fit the new electrode to the lead. Fix the electrode in the burner with screw. Replace the burner cap.

Check the burner ignition. Replace the pan supports.

2.7To Change the Warmer

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the right-hand hotplate (see 2.1). Fit the new right-hand hotplate and reassemble in the reverse order.

Check the burner and warmer operation is satisfactory.

3 Controls

3.1.To Replace the Ignition or Light Switch

DISCONNECT FROM THE ELECTRICITY SUPPLY. Remove the control panel (see 1.1).

Note: The old switch may be destroyed during removal. Remove the old switch from its bezel by gripping the switch body behind the control panel and twisting sharply. Remove the switch bezel by folding back the locking wings and pushing forward.

To ￿t the new bezel to the control panel: ￿rst line up the raised key on its body with the cut-out in the control panel and push it in from the front.

Assemble the new switch to the bezel by lining up the key sections and pushing home. Fit the new button by pushing in from the front.

Replace the control panel in the reverse order and test for correct operation.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents User Guide Contents Before You Start Cleaning NnThis appliance is heavy so take care when moving itDo not use water on grease res and never pick Hotplate Burners Cooker OverviewWok Burner Griddle Wok CradleWarmer NnNever close the grill door when the grill is onGrill Use only heat resistant dishesOperating the Ovens OvensBrowning Element Conventional OvenClock Setting the Time of DayMinute Minder To Stop the Ovens AutomaticallyKey Lock Auto is Showing, You Want to Reset to Manual CookingMain Oven Lights AccessoriesStorage Oven ShelvesGeneral Oven Tips Tips on Cooking with the TimerApproximate cooking time Cooking TableSingle Ring Burners Cleaning Your CookerWok Burner Wok Cradle‘Cook & Clean’ Panels Control Panel and Oven DoorsGlass Fronted Door Panels Removing the Main Oven Linings Cleaning TableHotplate Outside of CookerTroubleshooting Oven door is misaligned An oven light is not workingService and Spares InstallationProvision of Ventilation Dear InstallerLocation of Cooker ConversionYou will also need the following tools Overhead Measurement a Positioning the CookerSide Clearances Measurements B & C Side Clearances Measurement D & EMoving the Cooker Lowering the Two Rear RollersCompleting the Move Fitting the Stability Bracket and Chain Fitting a Stability BracketFitting the Restraining Chain Levelling Fitting the Handles and HandrailNnThe handles should be above the xings Gas Connection Pressure TestingNatural Gas PropaneElectrical Connection Fixed WiringCurrent Operated Earth Leakage Breakers NnWARNING this Appliance Must be EarthedFinal Checks Fitting the PlinthCustomer Care Tap Adjustment Conversion to LP GasInjectors Affix Label Set the GovernorServicing PanelsHotplate Controls To Replace the Clock To Change the Warmer SwitchTo Change the Ignition Generator To Replace the Grill ControllerTo Remove the Right-hand Oven Inner Back To Replace a ThermostatTo Change the Fan in the Right-hand Oven To Remove an Oven Element Thermal Cut-outDoors To Adjust an Oven Door Catch Keep To Adjust an Oven Door AngleTo Replace an Oven Door To Replace an Oven Door Outer PanelKey Circuit DiagramDimensions Technical DataConnections Ratings

toledo specifications

JVC Toledo is a renowned name in the world of audio-visual technology and solutions, known for its innovative products and commitment to delivering exceptional quality. The brand is recognized for its wide range of consumer electronics, including televisions, camcorders, projectors, and audio equipment. The JVC Toledo line embodies a blend of advanced technology, user-friendly features, and aesthetic design, making it an attractive choice for consumers and professionals alike.

One of the main features of JVC Toledo products is their cutting-edge display technology. The brand incorporates 4K Ultra HD resolution, which delivers four times the detail of Full HD. This technology ensures that viewers experience vivid colors, sharp contrasts, and stunning clarity, elevating their viewing experience. The incorporation of High Dynamic Range (HDR) further enhances image quality by offering a wider range of brightness and contrast. This makes it ideal for enjoying movies, sports, and gaming.

In terms of audio technology, JVC Toledo is known for its commitment to clear and immersive sound. Many of their audio products come equipped with advanced sound processing technologies like Dolby Atmos and DTS. This allows for an enveloping audio experience that captures every detail, making it suitable for both casual listening and serious audiophile applications.

Durability and design are also hallmarks of the JVC Toledo brand. Products are engineered to withstand the rigors of daily use, making them reliable for both home and professional environments. The designs often feature sleek lines and modern finishes, ensuring they integrate seamlessly into various settings.

Smart technology is another significant characteristic of JVC Toledo products. Many of their televisions and audio systems come with built-in streaming services and voice control capabilities, allowing users to easily access content and control their devices. This integration with popular services such as Netflix, Amazon Prime, and YouTube makes viewing effortless and adaptable to modern lifestyles.

Lastly, JVC has shown a strong commitment to sustainability through their eco-friendly initiatives. Many of their products are designed with energy-efficient features, reducing their environmental impact.

Overall, JVC Toledo stands out as a leader in the field of consumer electronics, offering products that combine innovative technology with quality craftsmanship and modern design. Whether for home entertainment or professional use, JVC Toledo continues to push the boundaries of what's possible in audio-visual technology.
Top Page Image Contents