T+A Elektroakustik CC 820 M user manual Recording, Preparing to make a recording

Page 32

Recording

Preparing to make a recording

If you wish to obtain optimum results when making a recording, it is important that you carry out the following procedure every time:

a) Calibrate the tape material (ATC)

b) Set the recording level accurately

c) Adjust the balance

d) Correct the bias setting if necessary

After a long press on the button the ATC circuit checks the tape in the cassette, and adjusts the machine for a perfectly linear frequency response. The processes b - c can be carried out during the recording as well during "record ready mode".

f) Switch the CC 820 M to "record ready mode" (press the button briefly)

The CC 820 M records the signal of the current auditioning source.

Exception:

If TAPE 1 is the current auditioning source, the system selects that source which was active before switching to TAPE 1.

Note:

If your M-system includes a DD 820 M and you select TAPE 1 as source, you may need to press the button before the signal to be recorded is present at the input of the CC 820 M.

Note:

To avoid the risk of switching to an incorrect source, only the sources TAPE 1 and the recording source can be selected during the recording process, and when you are preparing to record.

During recording preparations and the actual recording process the screen displays the VU meter at bottom right below the digital tape counter; this is needed to set the correct recording level.

To warn you that recording mode is selected, the LED above the button and the red REC indicator on the PT 820 M light up; this also flashes to indicate the operating mode Record + PAUSE. The tape direction indicator () shows the current tape side.

According to the diagram below you can now cycle through the processes of recording level, balance, manual bias correction and back to "record ready mode" by repeatedly pressing the button.

Pressing the button ends the PREPARING process immediately.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Betriebsanleitung Page Deutsch Seite /Willkommen  elektroakustik GmbH & Co KGInstallation Inbetriebnahme Sicherheitshinweise InhaltsverzeichnisBedienung Technische BeschreibungBedienelemente der Frontseite Cassetten-Schublade /  /  B / a  B / CMultifunktions-Display im PT 820 M HauptanzeigeAussteuerungsanzeige Anzeige für Aufnahmemodus und Band- richtungBedienung des CC 820 M Einlegen einer CassetteWiedergabe starten Beenden der WiedergabeFernbedienung des CC 820 M AllgemeinesAufnahme AufnahmevorbereitungManuelle BIAS-Korrektur Aussteuern einer AufnahmeBalance-Einstellung Grundeinstellungen AufnehmenAufnehmen mit Synchrostart Überspielen einer CD mit Synchro- FunktionAufnehmen mehrerer Stücke von unterschiedlichen CDs Schritte 1. bis 8. siehe nebenstehendRecorder Sonderfunktionen MenüsteuerungPLAY-Betriebsart Menüpunkt ErläuterungFilter / no Filter Menüpunkt Clear ATC Menüpunkt ErläuterungBegriffserläuterungen und Wissenswertes Aufnahme- und Löschsperre Technische Beschreibung Compact-CassettenBandsorten-Erkennung Technische Beschreibung DOLBY-Rauschunterdrückungssystem Installation Inbetriebnahme Sicherheitshinweise Die Anschlusselemente des CC 820 M  OutputVerkabelung Sicherheitshinweise Bestimmungsgemäßer GebrauchGerätezulassung und Konformität mit EG-Richtlinien Pflege des GerätesBetriebsstörungen No TapePage English Welcome Contents Front panel controls   /  /  B / aDisplay of Record mode and tape direction Multi-function screen on PT 820 MMain display Overload displayOperating the CC 820 M Inserting a cassetteStarting playback Ending playbackRemote control of the CC 820 M General informationRecording Preparing to make a recordingManual Bias correction Setting the recording levelBalance adjustment Basic settings Making the recordingRecording using Synchro-Start Transferring a CD to tape using the synchro-functionRecording several pieces from different CDs Steps 1. to 8. as abovePlay mode Menu point Introduction Special recorder functionsMenu control system OperationFilter / no Filter Menu point Clear ATC Menu point IntroductionExplanation of terms, useful information Record / erase protect tabs Technical description Compact-CassettesTape type detection Technical description Dolby noise reduction system Dolby B NRInstallation Using the unit for the first time Safety notes Connections to the CC 820 M Wiring Safety notes Approved usageApproval and conformity with EC directives Care of the unitFor use in the United States of America only FCC Information to the userClass B digital device instructions Trouble shooting Technische Daten / Specification Allgemeines / General information elektroakustik GmbH & Co. KG

CC 820 M specifications

T+A Elektroakustik is a renowned German manufacturer known for its high-fidelity audio products, seamlessly merging innovation with craftsmanship. Among their impressive lineup, the T+A CC 820 M stands out as a versatile compact speaker system designed to deliver an exceptional audio experience.

One of the main features of the CC 820 M is its sophisticated design, which elegantly fits into any modern interior. The cabinet is made from high-quality materials to ensure minimal resonance, thus preserving sound integrity. This attention to detail in construction contributes to the speaker’s overall performance, offering clarity and richness across various audio styles, from classical music to contemporary pop.

At the heart of the CC 820 M is T+A's unique transducer technology. This speaker employs advanced drive units, including a precision-made woofer and a high-frequency driver, engineered to work harmoniously together. The combination allows the speaker to reproduce sound accurately across a wide frequency spectrum, resulting in vibrant bass and sparkling treble without any distortion.

The CC 820 M also integrates sophisticated digital signal processing (DSP) technology. This feature enhances the speaker’s adaptability to different room acoustics, ensuring optimal performance regardless of surroundings. With intelligent algorithms, the DSP can analyze audio signals and adjust them in real time, providing a tailored listening experience.

Another standout characteristic is the speaker's connectivity options. The CC 820 M is equipped with various inputs, including analog, digital optical, and USB ports, allowing seamless integration with a multitude of devices such as computers, televisions, and streaming services. This versatility provides users with the freedom to enjoy their favorite audio content in numerous ways.

Furthermore, the CC 820 M features energy-efficient engineering, which not only conserves power but also reduces environmental impact. Its sleek and modern interface, complete with user-friendly controls, adds to the overall appeal, making it suitable for both audiophiles and casual listeners alike.

In conclusion, the T+A Elektroakustik CC 820 M compact speaker combines elegant design, cutting-edge technology, and high-performance sound. With its sophisticated transducer system, advanced DSP capabilities, and diverse connectivity options, this speaker is crafted to elevate the listening experience, making it a noteworthy choice for discerning audio enthusiasts.
Top Page Image Contents