T+A Elektroakustik CC 820 M user manual Explanation of terms, useful information

Page 38

Explanation of terms, useful information

Automatic calibrator (ATC)

The CC 820 M is equipped with a computer-based tape calibrator (Automatic Tape Calibration). The computer checks the sensitivity of the tape material in the machine at three frequency ranges (500 Hz, 5 kHz and 12 kHz), then adjusts the machine's settings to provide an optimum linear frequency response when making a recording.

Bias

The bias level (pre-magnetisation) is set to an optimum level by the automatic tape calibrator, but it can also be adjusted manually. The bias setting determines the level of the high-frequency part of the overall sound when a recording is made.

Copyright ©

Many recordings and pieces of music are protected by copyright, and taping them is only permissible if the rights of third parties are not affected. For further information on this subject please refer to the Copyright Act 1956, the Dramatic and Musical Performers Act 1958, and the Performers Protection Acts 1963 and 1972.

Digital tape counter

The digital tape counter fitted to the CC 820 M calculates the current tape position by monitoring the rotational speed of the left-hand and right-hand reels. Slight variations relative to real time are possible.

Dynamics

Music recordings sound especially lively if the dynamic range is wide. The dynamic range is the difference in level between the very quiet and very loud passages. For this reason the recording level must be adjusted so that the loudest passages are within the dynamic range of the tape material, otherwise the result will be distortion. Set the record level carefully!

MPX filter

If you wish to record stereo transmissions from an FM tuner, the MPX filter must be switched on if the tuner used contain an MPX filter. This filter suppresses the inaudible carrier frequencies at 19 and 38 kHz in the tuner signal, which would otherwise lead to distortion in the re-cording.

Record level

The recording level must be adjusted so that the loudest passages are within the dynamic range of the tape material otherwise the result will be distortion. On the other hand, the recording level must not be set too low, otherwise tape hiss will be obtrusive in very quiet passages. The CC 820 M can display the peak input level on the screen, and you can alter it.

Tape type

The CC 820 M detects the type of tape in the machine automatically by means of code slots on the rear face of the cassette shell. It then sets the bias and equalisation levels to match the tape. The type of tape has a considerable influence on the quality of the recording. In general terms chrome and metal cassettes provide higher fidelity than standard ferric oxide cassettes.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Betriebsanleitung Page Deutsch Seite /Willkommen  elektroakustik GmbH & Co KGBedienung Installation Inbetriebnahme SicherheitshinweiseInhaltsverzeichnis Technische Beschreibung /  /  B / a Bedienelemente der FrontseiteCassetten-Schublade  B / CAussteuerungsanzeige Multifunktions-Display im PT 820 MHauptanzeige Anzeige für Aufnahmemodus und Band- richtungWiedergabe starten Bedienung des CC 820 MEinlegen einer Cassette Beenden der WiedergabeFernbedienung des CC 820 M AllgemeinesAufnahme AufnahmevorbereitungManuelle BIAS-Korrektur Aussteuern einer AufnahmeBalance-Einstellung Grundeinstellungen AufnehmenAufnehmen mehrerer Stücke von unterschiedlichen CDs Aufnehmen mit SynchrostartÜberspielen einer CD mit Synchro- Funktion Schritte 1. bis 8. siehe nebenstehendPLAY-Betriebsart Menüpunkt Recorder SonderfunktionenMenüsteuerung ErläuterungFilter / no Filter Menüpunkt Clear ATC Menüpunkt ErläuterungBegriffserläuterungen und Wissenswertes Aufnahme- und Löschsperre Technische Beschreibung Compact-CassettenBandsorten-Erkennung Technische Beschreibung DOLBY-Rauschunterdrückungssystem Installation Inbetriebnahme Sicherheitshinweise Die Anschlusselemente des CC 820 M  OutputVerkabelung Gerätezulassung und Konformität mit EG-Richtlinien SicherheitshinweiseBestimmungsgemäßer Gebrauch Pflege des GerätesBetriebsstörungen No TapePage English Welcome Contents Front panel controls   /  /  B / aMain display Display of Record mode and tape directionMulti-function screen on PT 820 M Overload displayStarting playback Operating the CC 820 MInserting a cassette Ending playbackRemote control of the CC 820 M General informationRecording Preparing to make a recordingManual Bias correction Setting the recording levelBalance adjustment Basic settings Making the recordingRecording several pieces from different CDs Recording using Synchro-StartTransferring a CD to tape using the synchro-function Steps 1. to 8. as aboveMenu control system Play mode Menu point IntroductionSpecial recorder functions OperationFilter / no Filter Menu point Clear ATC Menu point IntroductionExplanation of terms, useful information Record / erase protect tabs Technical description Compact-CassettesTape type detection Technical description Dolby noise reduction system Dolby B NRInstallation Using the unit for the first time Safety notes Connections to the CC 820 M Wiring Approval and conformity with EC directives Safety notesApproved usage Care of the unitFor use in the United States of America only FCC Information to the userClass B digital device instructions Trouble shooting Technische Daten / Specification Allgemeines / General information elektroakustik GmbH & Co. KG

CC 820 M specifications

T+A Elektroakustik is a renowned German manufacturer known for its high-fidelity audio products, seamlessly merging innovation with craftsmanship. Among their impressive lineup, the T+A CC 820 M stands out as a versatile compact speaker system designed to deliver an exceptional audio experience.

One of the main features of the CC 820 M is its sophisticated design, which elegantly fits into any modern interior. The cabinet is made from high-quality materials to ensure minimal resonance, thus preserving sound integrity. This attention to detail in construction contributes to the speaker’s overall performance, offering clarity and richness across various audio styles, from classical music to contemporary pop.

At the heart of the CC 820 M is T+A's unique transducer technology. This speaker employs advanced drive units, including a precision-made woofer and a high-frequency driver, engineered to work harmoniously together. The combination allows the speaker to reproduce sound accurately across a wide frequency spectrum, resulting in vibrant bass and sparkling treble without any distortion.

The CC 820 M also integrates sophisticated digital signal processing (DSP) technology. This feature enhances the speaker’s adaptability to different room acoustics, ensuring optimal performance regardless of surroundings. With intelligent algorithms, the DSP can analyze audio signals and adjust them in real time, providing a tailored listening experience.

Another standout characteristic is the speaker's connectivity options. The CC 820 M is equipped with various inputs, including analog, digital optical, and USB ports, allowing seamless integration with a multitude of devices such as computers, televisions, and streaming services. This versatility provides users with the freedom to enjoy their favorite audio content in numerous ways.

Furthermore, the CC 820 M features energy-efficient engineering, which not only conserves power but also reduces environmental impact. Its sleek and modern interface, complete with user-friendly controls, adds to the overall appeal, making it suitable for both audiophiles and casual listeners alike.

In conclusion, the T+A Elektroakustik CC 820 M compact speaker combines elegant design, cutting-edge technology, and high-performance sound. With its sophisticated transducer system, advanced DSP capabilities, and diverse connectivity options, this speaker is crafted to elevate the listening experience, making it a noteworthy choice for discerning audio enthusiasts.
Top Page Image Contents