MAINTENANCE
Grease filters
CLEANING METAL CASSETTE GREASE FILTERS
• The filters must be cleaned every 2 months, or more frequently in case of particularly heavy use of the hood. Filters can be washed in a dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having disconnected the relative fastening elements.
•Wash the filters, taking care not to bend them. Let them get dry before refitting them. (The colour of the filter surface may change throughout the time but this has no influence to the fil- ter efficiency).
•When refitting the filters, make sure that the handle is visible on the outside.
•Close the sliding suction panel.
Charcoal filter (Recycling version)
REPLACING CHARCOAL FILTERS
Warning: Turn the lights off and wait until the lamps cool down before you change the odour filter.
• These filters are not washable and cannot be regenerated, and must be replaced approximately every four months or more frequently by particularly heavy use.
•Pull out the sliding suction panel.
•Remove the grease filters.
•Remove the saturated carbon filter by releasing the fixing hooks
•Fit the new filter by hooking it into its seating.
•Replace the grease filters.
•Close the sliding suction panel.
Lighting
LIGHT REPLACEMENT
28 W incandescent light.
• Remove the metal grease filters.
• Unscrew the bulbs and replace them with new ones having the same characteristics.
• Replace the metal grease filters.
EN |
| 8 |
| 8 |