TANDBERG D13841.08 Front and Rear Panels, About the Rear Panel LED Operation, 3G Gateway Start-up

Page 13

The Front and Rear Panels

TANDBERG 3G Gateway

USER GUIDE

About the Rear Panel LED Operation

Connectors, Switches, Display, and Buttons

Green: Normal operation.

Red Alarm or Loss of Signal (LoS) indicates that there is no signal and thus no framing information received. A defective or unplugged PRI cable will produce the same effect.

Yellow Alarm or Remote Alarm Indicator (RAI) means that the 3G Gateway is receiving framing info, but in this framing info the other side tells the 3G Gateway that it is not reading the Gateway’s transmitted framing information. Typically, this may be a broken connector in the transmit (TX) part of the PRI cable. This could also indicate weak or noisy signal in the transmit (TX) part of the PRI cable.

Blue Alarm indicates that the received frames are not synchronized properly.

No LED’s illuminate, indicates that layer one framing is working (right protocol like for example EURO ISDN selected), however, there is a problem at layer 2 caused by for example a CRC4 configuration mismatch.

3G Gateway Start-up

To start the 3G Gateway, simply connect the power cable, and press the power switch button at the back side to position 1.

Power switch

On the front panel of the system the power indicator LED, marked Pwr, will turn GREEN.

LCD panel Control buttons

RS 232 interface USB interface LAN interface

Power On/Off

 

 

indicator

VGA connector

1 PRI interface or 4 BRI interfaces

Power connector

Power switch

 

depending on the configuration ordered,.

 

 

Table of

 

Trademarks

&

Patents &

 

Safety/

To

Get You

Using the

3G

Viewing the

 

Configuring

 

Maintenance

 

Services

 

Dial Plan

 

Contact

Contents

 

Copyright

 

Disclaimers

 

Environmental

Upup

and Going

Gateway

 

System Status

the

3G Gateway

&

Upgrade

 

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D13841.08

 

 

 

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 13
Contents Guide Using the 3G Gateway Operator Safety / Environmental IssuesMaintenance and Upgrade ServicesCopyright 2007, Tandberg Trademarks and CopyrightTANDBERGTANDBERG3G3GGATEWAYateway Disclaimer, License Agreements, and Patent InformationPatents DisclaimersDisclaimer License Agreements Patent Information Safety Operator Safety / Environmental IssuesSafety Instructions Environmental Issues TANDBERGTANDBERG3G3GGATEWAYateway Tandberg 3G Gateway To get You Up and GoingGet You GoingConnecting the Cables Unpacking and InstallationAbout the 3G Gateway Features Highlights 3G Gateway Features at a Glance3G Gateway Capacity Typical Scenarios Front and Rear Panels Depending on the configuration orderedAbout the Rear Panel LED Operation 3G Gateway Start-upAbout Gateway Configuration Configuring Your 3G Gateway via the RS 232Configuring via the RS 232 Configuration via the Front PanelConfiguring via the Front Panel Configuring the IP Address via the Front PanelConfiguration via RS 232 Switching On the UnitUsing Using the 3G GatewayForgot the Password? Accessing the 3G GatewayUser name is admin Starting Up the 3G GatewayAn Overview of the Management Menu System Service Call detailsOverview Window Management MenuAbout Service Call Details Service Call DetailsWhen View Details Has Been Selected About Default Services Call Setup via Default ServicesDid Direct Inward Dialing Dial Extension IVR ExampleExample of IVR Using the Phone Book Dialing from Umts Using Phone BookAbout TMS Corporate Directory Viewing Viewing the System StatusAbout the Rear Panel LED Operation ISDN/PRI Status PRI Versions onlyISDN/BRI Status BRI Versions only About H.323 Status Registration Status Registered Gatekeeper StatusRegistration Status Inactive Registration Status RejectedIVR ServicesSystem Information System Resources Configuring Configuring the 3G GatewayTANDBERG3G3GGatewayateway 3G GatewayPRI Interface Configuration ISDN/PRI Configuration ISDN/PRI Versions onlyOutgoing Bearer capability Prefix on National/International NumbersISDN/BRI Configuration ISDN/BRI Versions only Configuration pane Link Set Details SS7 ConfigurationRoutes TrunksTandberg 3GGatewayateway SS7 Configuration - ExampleUser Userguide Guide SS7 Configuration - ExampleDNS Interface IP ConfigurationIP Address Assignment is Dhcp or Static Authentication Mode is Off or Auto ConfigurationSave SIP settings SIP ConfigurationSave. Press Save to activate new settings Snmp ConfigurationSystem Maintenance Maintenance and UpgradeUpgrade For dot-release upgrades a Release Key won’t be needed Maintenance GeneralUpgrading the System Maintenance Upgrading the SystemOption Keys Password Restart Maintenance Option Keys, Password and RestartAdd Option key Key. Shows Description. Shows Press Add OptionServices About Default Services Service Configuration Window Default ServicesConfiguration menu from the Service tab Example Dialplan ConfigurationDid Argument Details Argument Details for the Default did ServiceIVR Argument Details Argument Details for a Default IVR ServiceShow Dtmf Information Screen. This is a Show Dtmf Information Screen. Identical to TMS Corporate Directory Argument DetailsDial Plan Dial Plan ExamplesExamples About the Examples Did Dial Plan Examples Some Dial Plan ExamplesExample 1 Number-plan mapping Dial Extension IVR Dial Plan Examples Dial Extension IVR ExamplesExample 6 3G to SIP IVR TMS Corporate Directory Contact Contact Information

D13841.08 specifications

The TANDBERG D13841.08 is a sophisticated video conferencing endpoint designed to streamline communication and collaboration among teams across the globe. Known for its advanced technology and user-friendly interface, this device meets the needs of modern businesses seeking efficient ways to connect.

One of the standout features of the D13841.08 is its high-definition video quality. With support for 1080p resolution, it ensures crisp and clear visuals, allowing participants to engage in meetings with enhanced clarity. This is particularly beneficial for presentations and collaborative discussions, where visual detail is essential.

Equipped with multiple video codecs, the D13841.08 provides flexibility in various network conditions. The device supports H.264, H.265, and SVC, ensuring high-quality performance regardless of bandwidth availability. This adaptability helps maintain seamless communication even in challenging network environments, making it suitable for organizations with fluctuating internet speeds.

The D13841.08 incorporates an intuitive user interface that simplifies the process of initiating and managing video calls. With a touch-screen display, users can easily navigate through menus, access frequently used settings, and connect to meetings with just a few taps. This ease of use minimizes the learning curve for new users, making it an ideal choice for organizations of all sizes.

Audio quality is another important consideration for video conferencing, and the D13841.08 does not disappoint. It features advanced audio processing technologies, such as echo cancellation and noise suppression, which enhance the clarity of conversations. With built-in microphones and speaker systems, users can expect rich audio experiences that promote effective collaboration.

Security is a top priority for video conferencing solutions, and the D13841.08 is designed with robust security features. It employs encryption protocols to safeguard data transmitted during video calls, ensuring confidential information remains protected. Compliance with industry standards further reinforces the security of the device, making it a reliable choice for sensitive business discussions.

The TANDBERG D13841.08 also supports integration with various collaboration tools, allowing users to seamlessly combine video conferencing with applications like Microsoft Teams, Zoom, and Cisco Webex. This compatibility enhances productivity by enabling users to leverage their preferred platforms.

In conclusion, the TANDBERG D13841.08 is a powerful video conferencing endpoint that excels in delivering high-quality video and audio, user-friendly operation, and robust security. Its adaptability to different network conditions and compatibility with popular collaboration tools make it an excellent choice for enhancing communication in today's dynamic work environments.