TANDBERG D13841.08 manual Configuration, Save, Authentication Mode is Off or Auto

Page 36

H.323 Configuration

TANDBERG3G3GGatewayateway

USERUSERGUIDEGUIDE

Select H.323 to access the H.323 Configuration pane.

When registered with

a gatekeeper, the H.323 Status shows

Registered, the Gatekeeper’s IP address and the Port used (see also Status, H.323 Status).

Dialing out from IP to

IP or ISDN, through the 3G Gateway,

requires the use of H.323 numbers (E.164 aliases and service prefixes). This means that the 3G Gateway must be registered to a Gatekeeper; select the H.323 menu item in the Configuration menu.

Save. When ready to store the new settings, press

Save.

In case password is not set/configured/inserted, the 3G Gateway will

still use the Authentication ID to register with the gatekeeper. However, when the Authentica- tion ID is left “unused”, the System Name field. will be used to register the 3G Gateway with the gatekeeper instead. In case both the Authentication ID field and the System Name field are “unused” the 3G Gateway can not be registered with the gatekeeper.

Mode. Enables the 3G Gateway to register with a Gatekeeper or leave it unregistered, i.e. in direct mode. When registered with a gatekeeper, the H.323 Status shows Registered, the Gatekeeper’s IP address and the Port used.

When the registration fails, the Registration status will be ‘rejected’. Three cases can be distinguished:

Gatekeeper unreachable; the 3G Gateway’s H.323 stack returns this reject message in case the gatekeeper is down.

Duplicate alias; a system with an identical name has already been registered.

Authentication failure; Authentication ID and/or Authentication Password are incorrect.

Selecting direct mode will result in no Gatekeeper registration; hence it is not possible to dial through the 3G Gateway via alias names. The H.323 Status shows Inactive.

IP Address. Enter the Gatekeeper IP Address that the 3G Gateway should register to. Leaving this empty will result in direct dialing without the use of aliases.

Authentication Mode is Off or Auto.

Off. Register to the Gatekeeper without authentication.

Auto. Register to the Gatekeeper with H.235 authentication using ID/Password given below.

Authentication ID and Password. Enter the ID and pass- word required to perform H.235 authentication at the Gatekeeper. To register with a Gatekeeper that requires authentication, an NTP server has to be configured.

If the Gatekeeper is configured with an

alternative Gatekeeper, the Status area may report a registration to the IP address

of the alternative Gatekeeper.

Table of

 

Trademarks

&

Patents &

 

Safety/

To

Get You

Using the

3G

Viewing the

 

Configuring

Maintenance

 

Services

 

Dial Plan

 

Contact

Contents

 

Copyright

 

Disclaimers

 

Environmental

Up

and Going

Gateway

 

System Status

the

3G Gateway

& Upgrade

 

 

Examples

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D13841.08

 

 

 

 

 

 

 

36

 

 

 

 

 

 

 

 

 

 

10.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 36
Contents Guide Operator Safety / Environmental Issues Using the 3G GatewayMaintenance and Upgrade ServicesTrademarks and Copyright Copyright 2007, TandbergDisclaimer, License Agreements, and Patent Information TANDBERGTANDBERG3G3GGATEWAYatewayPatents DisclaimersDisclaimer License Agreements Patent Information Operator Safety / Environmental Issues SafetySafety Instructions Environmental Issues TANDBERGTANDBERG3G3GGATEWAYateway To get You Up and Going Tandberg 3G GatewayGet You GoingUnpacking and Installation Connecting the Cables3G Gateway Features at a Glance About the 3G Gateway Features Highlights3G Gateway Capacity Typical Scenarios Depending on the configuration ordered Front and Rear PanelsAbout the Rear Panel LED Operation 3G Gateway Start-upConfiguring Your 3G Gateway via the RS 232 About Gateway ConfigurationConfiguring via the RS 232 Configuration via the Front PanelConfiguring the IP Address via the Front Panel Configuring via the Front PanelConfiguration via RS 232 Switching On the UnitUsing the 3G Gateway UsingAccessing the 3G Gateway Forgot the Password?User name is admin Starting Up the 3G GatewayService Call details An Overview of the Management Menu SystemOverview Window Management MenuService Call Details About Service Call DetailsWhen View Details Has Been Selected Call Setup via Default Services About Default ServicesDid Direct Inward Dialing Dial Extension IVR ExampleDialing from Umts Using Phone Book Example of IVR Using the Phone BookAbout TMS Corporate Directory Viewing the System Status ViewingISDN/PRI Status PRI Versions only About the Rear Panel LED OperationISDN/BRI Status BRI Versions only Gatekeeper Status About H.323 Status Registration Status RegisteredRegistration Status Inactive Registration Status RejectedServices IVRSystem Information System Resources Configuring the 3G Gateway ConfiguringTANDBERG3G3GGatewayateway 3G GatewayISDN/PRI Configuration ISDN/PRI Versions only PRI Interface ConfigurationOutgoing Bearer capability Prefix on National/International NumbersISDN/BRI Configuration ISDN/BRI Versions only SS7 Configuration Configuration pane Link Set DetailsRoutes TrunksSS7 Configuration - Example Tandberg 3GGatewayatewaySS7 Configuration - Example User Userguide GuideIP Configuration DNS InterfaceIP Address Assignment is Dhcp or Static Configuration Authentication Mode is Off or AutoSave SIP Configuration SIP settingsSnmp Configuration Save. Press Save to activate new settingsSystem Maintenance and Upgrade MaintenanceUpgrade Maintenance General For dot-release upgrades a Release Key won’t be neededMaintenance Upgrading the System Upgrading the SystemMaintenance Option Keys, Password and Restart Option Keys Password RestartAdd Option key Key. Shows Description. Shows Press Add OptionServices Default Services About Default Services Service Configuration WindowConfiguration menu from the Service tab Dialplan Configuration ExampleArgument Details for the Default did Service Did Argument DetailsArgument Details for a Default IVR Service IVR Argument DetailsShow Dtmf Information Screen. This is a TMS Corporate Directory Argument Details Show Dtmf Information Screen. Identical toDial Plan Examples Dial PlanExamples Some Dial Plan Examples About the Examples Did Dial Plan ExamplesExample 1 Number-plan mapping Dial Extension IVR Examples Dial Extension IVR Dial Plan ExamplesExample 6 3G to SIP IVR TMS Corporate Directory Contact Information Contact

D13841.08 specifications

The TANDBERG D13841.08 is a sophisticated video conferencing endpoint designed to streamline communication and collaboration among teams across the globe. Known for its advanced technology and user-friendly interface, this device meets the needs of modern businesses seeking efficient ways to connect.

One of the standout features of the D13841.08 is its high-definition video quality. With support for 1080p resolution, it ensures crisp and clear visuals, allowing participants to engage in meetings with enhanced clarity. This is particularly beneficial for presentations and collaborative discussions, where visual detail is essential.

Equipped with multiple video codecs, the D13841.08 provides flexibility in various network conditions. The device supports H.264, H.265, and SVC, ensuring high-quality performance regardless of bandwidth availability. This adaptability helps maintain seamless communication even in challenging network environments, making it suitable for organizations with fluctuating internet speeds.

The D13841.08 incorporates an intuitive user interface that simplifies the process of initiating and managing video calls. With a touch-screen display, users can easily navigate through menus, access frequently used settings, and connect to meetings with just a few taps. This ease of use minimizes the learning curve for new users, making it an ideal choice for organizations of all sizes.

Audio quality is another important consideration for video conferencing, and the D13841.08 does not disappoint. It features advanced audio processing technologies, such as echo cancellation and noise suppression, which enhance the clarity of conversations. With built-in microphones and speaker systems, users can expect rich audio experiences that promote effective collaboration.

Security is a top priority for video conferencing solutions, and the D13841.08 is designed with robust security features. It employs encryption protocols to safeguard data transmitted during video calls, ensuring confidential information remains protected. Compliance with industry standards further reinforces the security of the device, making it a reliable choice for sensitive business discussions.

The TANDBERG D13841.08 also supports integration with various collaboration tools, allowing users to seamlessly combine video conferencing with applications like Microsoft Teams, Zoom, and Cisco Webex. This compatibility enhances productivity by enabling users to leverage their preferred platforms.

In conclusion, the TANDBERG D13841.08 is a powerful video conferencing endpoint that excels in delivering high-quality video and audio, user-friendly operation, and robust security. Its adaptability to different network conditions and compatibility with popular collaboration tools make it an excellent choice for enhancing communication in today's dynamic work environments.