Zanussi ZGF782C manual Commissioning, Conversion from Natural Gas to LPG, To adjust the gas rate

Page 14
To adjust, use a thin bladed screwdriver and turn the adjustment screw (see diagram) until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners.

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

-Turn the gas tap to the MAX position and ignite.

-Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

Procedure:

ΦRe-ignite the burner and set to MIN. Remove the control knob.

Pressure Testing

Minimum adjustment screw

Remove left hand pan support and front left

 

Φ burner cap and crown.

 

Fit manometer tube over the injector.

 

Turn on the burner gas supply and ignite

 

another burner.

 

The pressure reading should be nominally

 

20mbar and must be between 17 mbar and

 

25mbar.

 

Turn off the burner supplies.

 

Conversion from Natural Gas to LPG

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electrical supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors.

To adjust the gas rate

With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw. Upon completion stick the replacement rating plate on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GAS HOB Important Safety Information Contents Description of the HobHob burners Maintenance and CleaningOperation Hob TopCast Iron Pan Supports Symptom SolutionSomething Not Working? Guarantee Conditions Instructions for the Installer Engineers technical dataImportant safety requirements LocationGas Connection InstallationWhen the HOB is First Installed Cut Out SizeBuilding over a kitchen unit with door BuildingBuilding over a cupboard or drawer Fitting the Hob into the worktopThis HOB Must be Earthed Supply cable replacementElectrical connections Ignitor Switch Ignitor Unit Wiring DiagramFault Finding Preliminary Electrical Systems CheckIgnition System / Gas Ignition Conversion from Natural Gas to LPG To adjust the gas rateCommissioning Page Customer Care

ZGF782C specifications

The Zanussi ZGF782C is a cutting-edge kitchen appliance that seamlessly combines performance, efficiency, and modern design, making it an essential part of any contemporary cooking space. This multifunctional gas hob is designed for those who appreciate both style and functionality in their cooking experience.

One of the standout features of the Zanussi ZGF782C is its innovative design, which includes four gas burners that cater to a wide range of cooking needs. The burners vary in size, from a powerful wok burner to smaller burners ideal for simmering sauces or cooking delicate dishes. This variety allows users to prepare multiple dishes simultaneously, making meal preparation quicker and more efficient.

A significant technology present in the Zanussi ZGF782C is its automatic ignition system. This feature eliminates the need for matches or lighters, providing users with a safe and convenient way to ignite the burners with just the push of a button. The hobs also come with controls that are front-mounted, allowing for easy access without reaching over hot pots and pans, thus enhancing safety in the kitchen.

Safety is paramount in kitchen appliances, and the Zanussi ZGF782C does not disappoint. It is equipped with a flame failure device, which automatically cuts off the gas supply if the flame goes out, offering peace of mind while cooking. This safety feature is crucial for families with children or anyone concerned about accident prevention.

Another characteristic worth noting is the hob’s easy-to-clean surface. Made from durable and easy-to-wipe materials, spills and splatters can be effortlessly removed, allowing users to maintain a clean and tidy kitchen environment. The design also incorporates removable cast iron pan supports, which not only contribute to heat retention but also add a professional touch that enhances stability when using heavy cookware.

In terms of energy efficiency, the Zanussi ZGF782C operates on natural gas but can easily adapt to LPG, making it versatile for various household needs. This adaptability ensures that the hob remains practical and efficient, regardless of fuel availability.

In summary, the Zanussi ZGF782C is not just a gas hob; it's a versatile and reliable kitchen appliance that enhances cooking experiences through its thoughtful design and advanced features. With safety, performance, and ease of use at the forefront, this hob is an excellent choice for anyone looking to elevate their culinary environment.
Top Page Image Contents