Zanussi ZCM 631 manual Commissioning, Conversion from Natural to LPG Gas, To adjust the gas rate

Page 23

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

-Turn the gas tap to the MAX position and ignite.

-Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

ΦProcedure:

-Re-ignite the burner and set to MIN.

-Remove the control knob.

The adjustment screw is located down the centre of the gas tap control shaft or on the lower right hand side of the shaft (see diagram).

-To adjust, use a thin bladed screwdriver and turn the adjustment screw until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners.

ΦPressure Testing

-Remove pan support and front left burner cap and crown.

-Fit manometer tube over the injector.

-Turn on the burner gas supply and ignite another burner supply.

-The pressure reading should be nominally 20mbar and must be between 17 mbar and 25mbar.

-Turn off the burner supplies.

a

FO 1032

a)Minimum adjustment screw

b)Tap

Conversion from Natural to LPG Gas

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a CORGI registered engineer.

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electricity supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors (see Table: page 19).

To adjust the gas rate

With the aid of a thin bladed screwdriver completely tighten clockwise the by pass screw. Upon completion stick the replacement rating plate near the gas supply pipe.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Mixed Fuel Cooker Important Safety Information Description of the Cooker ContentsFitting the Splash back Oven Cavity AccessoriesControl Panel Triple-crown burner Using the HobHob burners Thermostat Control Knob Using the OvenBefore the First Use of the Oven Oven Function Control KnobControls Hour Clock and TimerManual Function Storage Drawer Condensation and steamCookware Effects of dishes on cooking resultsHints and Tips Using the Conventional OvenHow to Use the Conventional Oven Top oven element onlyMeat Temperatures Cooking Chart Conventional OvenFan Oven How to Use the Fan OvenFan Cooking Chart Always Cook Thoroughly Immediately Afterthawing How to Use DefrostingDefrosting Chart DefrostingGrilling ΦHow to Use the GrillCooking chart Burners Maintenance and CleaningHob Top Pan SupportsCleaning the Oven Something Not Working Service and Spare PartsSymptom Solution Customer Care Department Guarantee ConditionsImportant Safety Requirements Instructions for the InstallerPositioningtheAppliance Fig LocationPositioning the Cooker Fitting the Stability Bracket Not supplied Connecting to GasThis Cooker Must be Earthed Electrical connectionsPermanent Connection Conversion from Natural to LPG Gas To adjust the gas rateCommissioning Customer Care

ZCM 631 specifications

The Zanussi ZCM 631 is a versatile and efficient cooking appliance that perfectly balances performance and style for your kitchen. Renowned for its practical features and advanced technologies, this gas cooker is ideal for both budding home cooks and experienced chefs alike.

One of the standout features of the ZCM 631 is its powerful gas hob, which comes equipped with four burners of varying sizes. This allows for maximum flexibility when preparing meals, accommodating everything from small saucepans to larger pots for boiling or stewing. The burners are designed for efficient heat distribution, ensuring that your food cooks evenly and quickly. The inclusion of a heavy-duty cast iron pan support not only adds strength and stability but also provides a professional look to the cooker.

Another impressive aspect of the Zanussi ZCM 631 is its integrated oven, which offers a spacious capacity that can handle a variety of dishes, from roasts to baked goods. The oven features a fan-assisted cooking system, ensuring even heat distribution throughout the cavity to achieve consistently excellent results. Whether you're baking a delicate soufflé or roasting a joint of meat, the ZCM 631 provides the perfect environment for all your culinary creations.

Ease of use is a priority in the design of the ZCM 631. The appliance includes user-friendly controls that are straightforward and intuitive, allowing you to adjust temperatures and settings effortlessly. Additionally, the automatic ignition feature ensures that lighting the burners is a breeze, eliminating the need for matches or lighters.

Cleaning is made easy with this model, thanks to its enamel-coated surfaces which are resistant to stains and easy to wipe down. The oven door is also designed for easy removal, allowing for convenient access when it comes to deep cleaning.

In terms of safety, the Zanussi ZCM 631 is equipped with flame failure devices that automatically cut off the gas supply if the flame goes out, providing peace of mind while cooking.

With its stylish design, practical features, and innovative technologies, the Zanussi ZCM 631 is a fantastic addition to any kitchen, making it easier than ever to create delicious meals with confidence. Whether you’re a fan of traditional cooking methods or looking to modernize your culinary skills, the ZCM 631 offers everything you need to explore and enhance your cooking experience.
Top Page Image Contents