Installation

Location of the appliance

This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom, shower room or garage. It is essential that the appliance is positioned as stated below (see fig.1) i.e. shelves, wall cabinets and cooker hoods must be fitted a minimum of 787mm directly above the top of the hotplate and 400mm above the hotplate when fitted in line with the outside of the appliance. If the units are intended to be fitted adjacent to the appliance but less than 400mm above the hotplate, then a minimum space of 100mm must be maintained between the sides of the unit and the appliance (see fig.). Curtains must not be fitted immediately behind the appliance or within 150mm of the sides of the hotplate. If fitted next to or between two base units a minimum space of 1mm must be left between each unit and the side of the appliance. The levelling feet fitted to the appliance will achieve a nominal height to hotplate trims of 900mm +20mm.

Positioning the Appliance (Fig. 1)

This appliance cannot be positioned on a base.

The appliance cannot be installed beside or between furniture units whose height exceeds the cooker worktop.

Note A:

The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc.

Note B:

The hotplate side trims should be flush with the cabinets and must not be below. Adjustable levelling feet at the front and rear are provided on the base of the appliance. Adjustment is obtained by rotating in or out, the feet at the front or rear of the appliance from the underside of the appliance.

A spirit level should be placed on a cake tray on one of the shelves to confirm that the appliance is correctly levelled.

The levelling feet fitted to the appliance will achieve a height to hotplate trims of 900mm-0 + 10.

Note C:

If the appliance is fitted next to a side wall or cabinets above height of the hotplate trims, then a gap of 115 mm is required.

Curtains must not be fitted immediately behind the cooker or within 115 mm of the sides of the cooker.

Note D:

Any wall cabinet or extractor must not be lower than 780mm above hotplate level.

Note E:

Wall cabinets may be fitted in line with the sides of the base units, providing that the lower edge of the wall cabinet is a minimum of 420mm above the worktop.

L.P.G. cookers MUST NOT be installed below ground level, i.e. in a basement, or aboard any boat, yacht or other vessel.

For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S 813 Current Edition Section 7- Permitted Locations of Appliance.

Positioning the Cooker

Caution:

Some soft or badly fitted floor coverings can be damaged when the cooker is moved across their surface for cleaning. It is advisable to ensure that the floor covering in the area below the cooker is either securely fixed so as not to become damaged when the cooker is moved or, if preferred, removed.

	D
C		780	E
C	115		420
	115

	B
			A
FO 1141

Fig. 1

ZCM 640 ZCM 641 specifications

The Zanussi ZCM 640 and ZCM 641 are both high-performing cookers designed to meet the needs of modern households. Offering a combination of functionality, efficiency, and user-friendly technology, these models stand out in the realm of home cooking appliances.

One of the primary features of the Zanussi ZCM 640 and ZCM 641 is their versatile cooking options. Equipped with four gas burners, these cookers provide multiple cooking zones, allowing for simultaneous preparation of multiple dishes. The burners come in different sizes, accommodating everything from quick boiling of water to simmering delicate sauces. Furthermore, the models feature a robust and spacious oven, ensuring ample cooking space for large meals or multiple dishes at once.

Both models are built with safety in mind. They come equipped with flame failure devices that automatically cut off the gas supply if the flame goes out, providing peace of mind while cooking. The cookers also feature an easy-to-clean enamel interior, which allows for hassle-free maintenance after cooking sessions.

The Zanussi ZCM 640 and ZCM 641 incorporate cutting-edge technology that enhances the cooking experience. The integrated electronic ignition system ensures quick and easy lighting of the burners, eliminating the need for matches or lighters. Additionally, the models boast a grill function that allows for perfect browning and crisping, ideal for everything from cheesy dishes to roasted vegetables.

Another key characteristic of these cookers is their aesthetic appeal. Both models are designed with a sleek and modern finish, which complements various kitchen styles. The user-friendly control knobs are strategically placed for easy access, providing precise control over cooking temperatures.

In terms of energy efficiency, the Zanussi ZCM 640 and ZCM 641 are designed to help reduce energy consumption while delivering reliable performance. With optimized burner designs, these cookers enable quick heat-up times, saving both energy and time in the kitchen.

Overall, the Zanussi ZCM 640 and ZCM 641 are an excellent choice for those seeking a reliable and efficient cooker. With their versatile cooking options, user-friendly technology, and emphasis on safety, these models cater to a wide range of culinary needs, making them valuable additions to any kitchen. Whether you are preparing everyday meals or hosting special occasions, these cookers are designed to deliver consistent results and enhance your cooking experience.