Desa SDVBPD, SDVBND installation manual Product Identification, With stove

Page 3

SAFETY INFORMATION PRODUCT IDENTIFICATION

3

SAFETY INFORMATION

Continued

6.

Carefully supervise young children when they are in the room

 

with stove.

7.

Do not modify the burner or stove under any circumstances. Any

 

parts removed for servicing must be replaced prior to operating

 

stove or burner system.

8.

Turn burner system off and let cool before servicing, install-

 

ing, or repairing. Only a qualified service person should in-

 

stall, service, or repair the stove or burner system. Have burner

 

system inspected annually by a qualified service person.

9.

You must keep control compartments, burners, and circulat-

 

ing air passages clean. More frequent cleaning may be needed

 

due to excessive lint and dust from carpeting, bedding mate-

 

rial, pet hair, etc. Turn off the gas valve and pilot light before

 

cleaning stove or burner system.

10.

Have venting system inspected annually by a qualified service

 

person. If needed, have venting system cleaned or repaired.

 

See Cleaning and Maintenance, page 29.

11.

Keep the area around your stove clear of combustible materi-

 

als, gasoline, and other flammable vapor and liquids. Do not

 

run burner system where these are used or stored. Do not place

PRODUCT IDENTIFICATION

Cast Iron

Stove Body

Log Set

 

L

 

I OT

OF

O

IN OUT

Piezo Ignitor

Control Valve

Cast Iron

VentStove Body

Opening

 

items such as clothing or decorations on or around stove.

12.

Do not use this stove to cook food or burn paper or other objects.

13.

Never place anything on top of stove.

14.

Do not use any solid fuels (wood, coal, paper, cardboard, etc.)

 

in this stove. Use only the gas type indicated on burner system

 

nameplate.

15.

This appliance, when installed, must be electrically grounded

 

in accordance with local codes or, in the absence of local codes,

 

with the National Electrical Code, ANSI/NFPA 70, or the Ca-

 

nadian Electrical Code, CSA C22.1.

16.

Do not obstruct the flow of combustion and ventilation air in

 

any way. Provide adequate clearances around air openings into

 

the combustion chamber along with adequate accessibility

 

clearance for servicing and proper operation.

17.

Do not install stove directly on carpeting, vinyl tile, or any com-

 

bustible material other than wood. The stove must set on a metal

 

or wood panel extending the full width and depth of the stove.

18.

Do not use stove or burner system if any part has been ex-

Rear

Cover

Pilot

Assy

Blower with

Adjustment

Knob (Optional

Installation)

Stove

Front

Burner

Glass

Door Assy

Lava Rock

 

posed to or under water. Immediately call a qualified service

 

person to arrange for replacement of the unit.

19.

Do not operate burner system if any log is broken.

20.

Do not use a blower insert, heat exchanger insert, or other ac-

 

cessory not approved for use with this stove.

21. Do not operate burner system with glass door removed, cracked,

 

or broken.

22.

Provide adequate clearances to air openings.

Glowing

Grate Assembly

Embers

 

Figure 1 - DESA Direct-Vent Burner System Shown Installed in Approved Cast Iron Stove Body (Oxford™ Model Shown)

For morevisit www..com

112126-01B

Image 3
Contents VH series Stove OWNER’S Operation and Installation ManualFor Your Safety For Your Safety What to do if YOU Smell GASSafety Information Table of ContentsWith stove Product IdentificationPRE-INSTALLATION Preparation Product Features Local CodesGlossary of Terms PRE-INSTALLATION Preparation Cast Iron Stove and DIRECT-VENT Burner System AssemblyStove Body Assembly Locating Threaded Holes for Legs and Door Attachment Amity Models Installing DIRECT-VENT Burner System Into Stove BodyRemoving Front Surround Panel Removing Screen OptionalTOP View Installing Optional Blower Accessory Installing the BlowerBlower Wiring Layout Thermostat Blower Shown Installing Rear CoverLocation of Vent Termination General VentingGeneral Venting Venting Installation Installation PrecautionsInstallation Planning Installing Vent System in a Chase Installation for Horizontal TerminationVent Opening Requirements Venting with Two 90 Elbows Horizontal Termination ConfigurationsHorizontal Venting Venting with Three 90 ElbowsFlat Ceiling Installation Installation for Vertical TerminationCathedral Ceiling Installation Vertical Termination ConfigurationsVenting with Two 90 Elbow Venting with Two Elbows Vertical Venting Configuration Using Two 90ElbowsNumber Description High Altitude InstallationParts Lists for Venting Kits and Components Vertical VentingCheck GAS Type Stove and DIRECT-VENT Burner System InstallationInstalling GAS Piping to STOVE/ Burner System Location Installation Items NeededConnecting STOVE/BURNER System to GAS Supply Pressure Testing Gas Supply Piping SystemChecking GAS Connections Pressure Testing Burner System Gas Connections Installing Optional Wall Mount Switch GWMS2Installing Remote Receiver and 9-volt Alkaline Battery Installing Optional Wall Mounted Thermostat GWMT1REMOVING/REPLACING Glass Door Installing Remote ReceiverInstalling Log No Installing Log No Installing LOGS, Lava Rock and Glowing EmbersTo Turn OFF GAS To Appliance For Your Safety Read Before LightingOperating Stove with Burner System Lighting InstructionsThermostat Series Models Ghrctb and Cghrctb Manual LightingOptional HAND-HELD Remote Operation ON/OFF Series Models Ghrcb and CghrcbOperating Optional GWMT1 Wall Mounted Thermostat Operating Optional Blower AccessoryPilot Assembly Inspecting BurnersLogs Cleaning and MaintenanceGlass Door Pilot and BurnersObserved Problem Possible Cause Remedy TroubleshootingOrifice Above Gas leak. See Warning statementParts Under Warranty SpecificationsWiring Diagram Replacement PartsModels Sdvbnd Sdvbpd Illustrated Parts BreakdownModels SDVBND, Sdvbpd Parts ListVictor Hearth Stove Body Indicates Color Suffix Designation Oxford Amity Stove BodyDescription QTY Indicates Color Suffix DesignationTechnical Service Service HintsAccessories Owners Registration Form For Com 112126-01B Warranty Information
Related manuals
Manual 42 pages 10.67 Kb

SDVBPD, SDVBND specifications

Desa SDVBPD and SDVBND are pioneering advancements in the domain of digital communication, designed to optimize services, enhance user engagement, and streamline processes in various sectors, including education, healthcare, and local governance. These systems have emerged as essential tools for efficient information dissemination and resource management.

One of the main features of Desa SDVBPD is its focus on decentralized communication. By utilizing local infrastructure, this system empowers communities to share information effectively and enhance interactions among residents. It enables local authorities to communicate directly with citizens, ensuring that pertinent information reaches the intended audience promptly. This feature is especially vital in emergency situations, where timely updates can significantly impact community safety and preparedness.

Similarly, SDVBND offers a robust platform for managing digital transactions and records. Its integration of blockchain technology ensures that all data processed is secure, immutable, and transparent. This characteristic is particularly beneficial for local government operations, as it minimizes the risk of fraud and enhances accountability in public service delivery. By leveraging this technology, Desa SDVBND can facilitate smooth and fast transactions between citizens and government entities, thereby transforming the way public services are accessed.

Another remarkable aspect of both systems is their accessibility. Designed with user-friendly interfaces, these platforms cater to individuals of varying technological proficiencies. Mobile compatibility allows users to engage with the systems from smartphones and tablets, making it easier to stay informed and involved. Furthermore, the platforms are multilingual, ensuring that communication is inclusive, reaching diverse populations within communities.

Interoperability stands out as a significant characteristic of Desa SDVBPD and SDVBND. Both systems are designed to seamlessly integrate with existing infrastructure and technologies, such as cloud computing and artificial intelligence. This adaptability enhances their functionality, enabling real-time data analysis and improved decision-making.

In conclusion, Desa SDVBPD and SDVBND represent a significant leap forward in community engagement and service delivery. By leveraging decentralized communication, blockchain technology, accessibility, and interoperability, these systems not only improve operational efficiency but also foster a sense of community empowerment. As they continue to evolve, they hold great promise for enabling smarter, more connected communities that can thrive in an increasingly digital world.