Note: When the automatic timed period starts, the oven neon will cycle ON and OFF during cooking.
B) TO SET THE TIMER TO SWITCH OFF ONLY
i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am. Fig.9.
ii)Place food in oven.
iii)To set the Length of Cooking Time press the
cooking hours button ( ) press the increase control (+) and if necessary the decrease control ( - ) until the cooking time is displayed, e.g. 2 hrs 15 mins. Fig. 10.
iv)Release the buttons. The AUTO display will glow and the time of day will be displayed after 5 seconds.
v)Set the oven temperature. The oven indicator neon should come ON.
vi)To check the stop time during the cooking period, simply press the stop time button and
the stop time ( ) will be displayed. Fig.11.
4.RETURNING THE COOKER TO MANUAL OR TO CANCEL AN AUTOMATIC PROGRAMME.
At the end of a timed cooking period, the AUTO light will flash and a bleeper will sound for up to 2 mins. This can be stopped by pressing any of the 4 left hand side buttons. Fig. 12.
Turn the oven temperature control to the OFF position. The AUTO display will continue to flash.
Press ( ) button. The AUTO display will go out.
Turn the oven control ON to check that the oven operates manually. The oven indicator neon will glow.
Turn all oven controls OFF. No indicator neons should be illuminated.
9.
10.
11.
12.
13.
A
U
T
O
A
U
T
O
14