Zanussi ZOP37902 Installation, Building, We recommend that you write the data here Model MOD

Page 19

Problem

The display shows an error code that is not on this list.

Steam and condensation collect on the food and in the oven.

Possible cause

There is an electronic fault.

You left the dish in the oven for too long.

Solution

1.Deactivate the appliance with the house fuse or the safety switch in the fuse box and acti- vate it again.

2.If the display shows the error code again, contact the service centre.

Do not keep the dishes in the oven for longer than 15-20 minutes after the cooking ends.

If you cannot find a solution to the problem yourself, con- tact your dealer or the service centre.

We recommend that you write the data here: Model (MOD.)

Product number (PNC) Serial number (S.N.)

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

.........................................

.........................................

.........................................

Installation

Warning! Refer to "Safety information" chapter.

Building In

558

	20
548

580

min. 550 20

573

589

min. 560

594

www.zanussi.com	19

Image 19

Contents Oven ZOP37902 Safety information ContentsAppliance must be earthed Care and cleaningElectrical connection UseProduct description Daily use Before first useButton Heat-up and residual heat indicatorDisplay ButtonsClock functions Using the accessoriesHelpful hints and tips Additional functionsBaking and roasting table CakesBaking cakes Cooking meat and fishCooking time Min Bread and PizzaMeat Flans1st side 2nd side FishQuantity Pieces GrillingLamb BeefPork VealDrying True Fan Cooking Fish steamedVegetables DefrostingInformation on acrylamides Care and cleaningPyro Cleaning Fruit Before you change the oven lamp Cleaning the oven door Cleaning reminder Cleaning reminder goes outWhat to do if… Installing the door and the glass panelsProblem SolutionOven lamp is defective Demo mode is activatedDisplay shows F102 Clock is not setBuilding InstallationWe recommend that you write the data here Model MOD Environment concerns Electrical installationApplicable types of cables for UK only Packaging material Page Page 397217001-B-452011