to the inner side of the door. Make sure that after the in- stallation the surface of the glass panel frame on the
Oven lamp
Warning! Be careful! There is the risk of electrical shock!
Before you change the oven lamp:
•Switch off the oven.
•Remove the fuses in the fuse box or switch off the cir- cuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
1.Turn the glass cover
2.Clean the glass cover.
3.Replace the oven light bulb with applicable 300°C
Use the same oven lamp type.
4.Install the glass cover.
What to do if…
Warning! Refer to "Safety information" chapter.
Problem
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The appliance does not heat up
The appliance does not operate
The time display shows "Pyro"
The time display shows an error code
Steam and condensation settle on the food and in the oven cavity
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released
The oven lamp is defective
The oven needs pyrolytic cleaning
Electronic error
You left the dish in the oven for too long
Remedy
Activate the appliance
Set the clock
Control the settings
Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician.
Replace the oven lamp
Start the pyrolytic cleaning process
Deactivate the appliance and activate again through the fuse or the safety switch in the fuse box. If the display shows the error message again, refer to the Service Force Centre
Do not leave the dishes in the oven for longer than
If you cannot find a solution to the problem yourself, con- tact your dealer or the service centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.
15