Cleaning the hinged grill
This model has been fitted with a hinged grill element to enable you to clean the roof of the oven easily.
Before proceeding ensure the oven is cool and is disconnected from the electricity supply.
)1) Undo the screws which holds the grill in place (see diagram). When carrying out this operation
for the first time, we recommend using a screwdriver.
2) Then gently pull the grill downward to allow access to the oven roof (see diagram).
3) Clean the oven roof with a suitable cleaner and wipe dry before replacing the hinged grill element.
4) Gently push up the grill element into place and firmly screw into place the holding nuts.
Ensure the grill holding nuts are firmly in place to avoid the grill falling down when in use.
Replacing the Oven Light
Disconnect the appliance from the power supply.
If the oven bulb needs replacing, it must comply with the following specifications:
-Electric power: 15 W,
-Electric rate:
-Resistant to temperatures of 300 °C,
-Connection type: E14.
These bulbs are available from your local Service Force Centre.
)1. Ensure the oven is disconnected from the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
FO 0287 |
17