Texas Instruments DEM-DAI3793A manual Related Documentation From Texas Instruments, Trademarks

Page 10

www.ti.com

Related Documentation From Texas Instruments

Related Documentation From Texas Instruments

The following documents provide information regarding Texas Instruments integrated circuits used in the assembly of the DEM-DAI3793A/3794A EVM. These documents are available from the TI web site. The last character of the literature number corresponds to the document revision that is current at the time of the writing of this User’s Guide. Newer revisions may be available from the TI web site at http://www.ti.com/ or call the Texas Instruments Literature Response Center at (800) 477–8924 or the Product Information Center at (972) 644–5580. When ordering, identify the document(s) by both title and literature number.

Data Sheet

Literature Number

 

 

PCM3793A/PCM3794A Product

SLAS529A

data sheet

 

DIT4096 Product data sheet

SBOS225B

Additional Documentation

The following document provides information regarding selected non-TI components that are used in the assembly of the DEM-DAI3793A/3794A EVM. This document is available from the corresponding manufacturer.

Device/Document

Manufacturer

 

 

LC89052

Sanyo Corporation

If You Need Assistance

If you have questions regarding either the use of this evaluation module or the information contained in the accompanying documentation, please contact the Texas Instruments Product Information Center at (972) 644–5580 or visit the TI web site at www.ti.com.

FCC Warning

This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his own expense is required to take whatever measures may be required to correct this interference.

Trademarks

All trademarks are the property of their respective owners.

10

Read This First

SBAU127 –July 2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Users Guide Submit Documentation Feedback Contents 100 List of Figures Side List of Tables Submit Documentation Feedback About This Manual How to Use This Manual Information About Cautions and WarningsIf You Need Assistance FCC Warning Related Documentation From Texas InstrumentsAdditional Documentation TrademarksDescription Pin Assignments and Terminal FunctionsKey Features Introduction-PCM3793A/94AIntroduction-PCM3793A/94A Pin Assignments and Terminal Functions PCM3793A/94A Terminal FunctionsDEM-DAI3793A/3794A EVM System Diagram DEM-DAI3793A/3794A EVM DescriptionSBAU127 -July Getting Started Electrostatic Discharge Warning Unpacking the EVMDefault Configuration EVM ConfigurationMotherboard Daughter Card #2 DEM-TRVC/LPCSet-Up Guide Software Control and Operation Basic Operating Set-UpUser Interface Panel Power On/Off Sequence Module Function ControlsPower Up/Down HP COM/MONO HPCPower Up/Down Time ms Options PCM3793A/94A Resistor 1257dh RES40 Resistor Value ControlRamp Up Wave Form with Default Setting Default Setting RecordDigital Mute ATR Options Gain Control for ADC Input OptionsDigital Out Mute Control Options Playback Playback Function Menu TabHeadphone Gain Control Options Speaker Gain Control OptionsAuto Level Control Record Options Digital Attenuation ATP OptionsALC Automatic Level Control Output Options Signal ProcessingSource Options Tone Control Options3D Effect Options Click Apply to Filter 1 or Apply to Filter15. Notch Filter Characteristic Model De-Emphasis Filter Options DAC Oversampling Control OptionsZero Cross Control Options High-Pass Filter OptionsAnalog Path 18. Analog Path Function Menu TabAnalog Mixer Options Analog Input OptionsD2S Select Options Mic Boost OptionsPG5 Gain and PG6 Gain Options Audio Interface Setting 1 OptionsAudio Interface Setting 2 Options Audio InterfaceHP Short Detection, L-Ch HP Detection, R-Ch HP Detection OptionsHP COM Short Detection Options Speaker Short Detection, L-Ch Speaker Short Detection, R-Ch4 LC89052T DIR Digital Audio I/F Receiver Control Window Digital AmplifierRegister Setting History 24. Register Setting History WindowModifying a .csv File 25. Opening and Modifying a .csv FileRead function Register Direct AccessWrite function Switches and Connectors Daughter Card #2 DIR LC89052T and DIT DIT4096Overview Main Power Supply and RegulatorPower-Supply Terminals for PCM3793A Power-Supply Pins MotherboardAudio I/O I/F Controller MSP430, TUSB3410Daughter Card #1 PCM3793A Analog Input and Output-Daughter Card #1Analog Output Configuration Daughter Card #1 Analog Input and Output-Daughter Card #2 Daughter Card #2 DIR LC89052T and DIT DIT4096Audio Clock and Input Data Control Format-Daughter Card #2 Evaluation and Measurements Slave Mode With Audio Precision SYS-2722 Default Setting Slave Mode Configuration With SYS-2722Jumper Configuration for Slave Mode Default Master Mode with Audio Precision SYS-2722 Master Mode Configuration With SYS-2722Jumper Configuration for Master Mode Combined Master and Slave Mode Configuration with SYS-2722 Combined Master and Slave Modes With PSIA-2722Measurements for Dynamic Characteristics Jumper Configuration for Combined Master and Slave ModesD/A Line Output Parameters Digital-to-Analog D/A PerformanceΩ Headphone Output Inserted in Headphone Jack J6 A/D Line Input Parameters Speaker Output Power PerformanceAnalog-to-Digital A/D Performance Stereo Speaker Output ParametersSpeaker Output Filter Configuration LC Low-Pass Filter4.1 A/D Spectrum Amplitude Versus Frequency PerformanceResult BPZ Zero Data Input Result -60dB Input 4.2 D/A Spectrum 11. D/A Amplitude vs FrequencyConnection Diagram for Practical Applications PCM3793A/94AFilter Consideration for Speaker Output 16. Recommended Ferrite Bead Filter for Speaker OutputSchematic, PCB Layout, and Bill of Materials Schematics PCM3793A DEM-PCM3793RHB-A Connector Daughter Card #1PCM3793A DEM-PCM3793RHB-A Daughter Card #1 Printed Circuit Board Layout PCM3793A DEM-PCM3793RHB-A Board Layout-Silkscreen SidePCM3793A DEM-PCM3793RHB-A Board Layout-Component Side PCM3793A DEM-PCM3793RHB-A Board Layout-Inner Layer PCM3793A DEM-PCM3793RHB-A Board Layout-Inner Layer PCM3793A DEM-PCM3793RHB-A Board Layout-Solder Side Component List Bill of MaterialsSubmit Documentation Feedback Appendix a Reference .csv Files Table A-1. .csv FilesRelated Signal Flow Diagrams Figure A-1. Line Output and Headphone OutputFigure A-2. Headphone Output with Sound Effect Figure A-3. Cap-Less Headphone Output Figure A-4. Headphone Output with Line Input AIN2L/AIN2R 0dB AIN3L MUX1 AIN2L AIN1L D2S AIN1R MUX2 AIN3R AIN2R Figure A-7. Stereo Speaker Output Figure A-8. Mono Speaker Output Figure A-9. Speaker Output with Line Input AIN2L/AIN2R Figure A-10. Speaker Output with Mono Mic Input AIN1L, +20dB +20dB Figure A-12. Line Input AIN2L/AIN2R to Headphone Output Figure A-13. Mono Line Input AIN2L to Headphone Output Figure A-14. Mono Mic Input AIN1L, +20dB to Headphone Output +20dB Figure A-16. Mono Mic Input AIN1L, +20dB to Speaker Output Figure A-17. Line Input AIN3L/AIN3R Figure A-18. Mic Input AIN1L/AIN1R, +20dB Figure A-19. Mic Input AIN1L/AIN1R, +20dB with ALC Figure A-20. Mono Mic Input AIN1L, +20dB Figure A-21. Mono Mic Input AIN1L, +20dB with ALC Figure A-22. Mono Diff Mic Input AIN1L/AIN1R, +20dB Figure A-23. Mono Diff Mic Input AIN1L/AIN1R, +20dB with ALC Figure A-24. Slave Mode Operation Interfacing to DSPsRegister Control with DSP Interface Table A-2. Recommended Power-On Sequence for PCM3793APackage Information Evaluation BOARD/KIT Important Notice FCC WarningImportant Notice

DEM-DAI3793A specifications

The Texas Instruments DEM-DAI3793A is a versatile digital-to-analog converter (DAC) evaluation module designed for assessing the performance and capabilities of TI's DACs in various applications. This module features the high-performance DAC3793, which is widely recognized for its precision and flexibility, making it an ideal choice for audio, industrial automation, and communication systems.

One of the standout features of the DEM-DAI3793A is its ability to support a 16-bit resolution. This high resolution enables the module to provide fine granularity in signal representation, ensuring that even the most subtle changes in the input signal are accurately reflected in the output. The DAC3793 also boasts a high sampling rate, which is crucial for applications that require rapid signal processing and real-time data conversion.

The module incorporates advanced technologies such as dynamic element matching and integrated circuitry to minimize distortion and noise. These technologies are crucial for achieving high-fidelity audio playback and improving overall system performance. Additionally, the DEM-DAI3793A is designed to minimize power consumption while maintaining exceptional performance levels, making it suitable for battery-operated devices and energy-conscious applications.

Another significant characteristic of the DEM-DAI3793A is its ease of integration with various development environments. The evaluation module supports both hardware and software interfacing, allowing engineers to quickly prototype and test their designs. It comes equipped with a USB interface for seamless connectivity with computers, along with supporting software tools that facilitate the configuration and testing of the DAC's functionalities.

The DEM-DAI3793A is also designed with a robust set of output options, including differential and single-ended outputs. This flexibility allows for compatibility with a wide range of amplification and filtering circuits. Furthermore, the evaluation module is equipped with convenient power supply options, enabling it to operate in various settings without the need for extensive modifications.

In conclusion, the Texas Instruments DEM-DAI3793A is an exceptional evaluation module that showcases the capabilities of the DAC3793. With its high resolution, advanced technologies, ease of integration, and flexible output options, it serves as an indispensable tool for engineers and developers working on high-performance audio and data processing applications.
Top Page Image Contents