Texas Instruments DEM-DAI3793A manual Reference .csv Files, Table A-1. .csv Files

Page 74

www.ti.com

Reference .csv Files

A.1 Reference .csv Files

The .csv files are bundled with the DEM-DAI3793A/3794A EVM Controller. These files enable users to execute register settings corresponding to the specific operating modes discussed in the product data sheet by importing them into the software.

Note that each .csv file (listed in Table A-1) must be implemented after an All Active operation is performed with the power_on.csv command; otherwise, these files will not work properly.

An All Active operation is recommended to start up the device, and can be executed by just clicking the All Power On button, as discussed in Section 3.2.

 

Table A-1. .csv Files

 

Operating Mode

.csv File Name

 

 

 

All Power Down

power_off.csv

All Active

 

power_on.csv

 

 

Playback with

Digital Input

 

 

 

 

01

Line Output and Headphone Output

01_DAC_Line_Output_and_Headphone_Output.csv

02

Headphone Output with Sound Effect

02_DAC_Headphone_Output_with_Sound_Effect.csv

03

Cap Less Headphone Output

03_DAC_Cap_Less_Headphone_Output.csv

04

Headphone Output with Line Input (AIN2L/AIN2R)

04_DAC_Headphone_Output_with_Line_Input.csv

05

Headphone Output with Mono Mic Input (AIN1L, +20dB)

05_DAC_Headphone_Output_with_Mono_Mic_Input.csv

06

Headphone Output with Mono Diff Mic Input

06_DAC_Headphone_Output_with_Mono_Diff_Mic_Input.

 

(AIN1L/AIN1R, +20dB)

csv

07

Stereo Speaker Output

07_DAC_Stereo_Speaker_Output.csv

08

Mono Speaker Output

08_DAC_Mono_Speaker_Output.csv

09

Speaker Output with Line Input (AIN2L/AIN2R)

09_DAC_Speaker_Output_with_Line_Input.csv

10

Speaker Output with Mono Mic Input (AIN1L, +20dB)

10_DAC_Speaker_Output_with_Mono_Mic_Input.csv

11

Speaker Output with Mono Diff Mic Input (AIN1L/AIN1R,

11_DAC_Speaker_Output_with_Mono_Diff_Mic_Input.csv

 

+20dB)

 

Playback without Digital Input

 

 

 

 

12

Line Input (AIN2L/AIN2R) to Headphone Output

12_Line_Input_to_Headphone_Output.csv

13

Mono Line Input (AIN2L) to Headphone Output

13_Mono_Line_Input_to_Headphone_Output.csv

14

Mono Mic Input (AIN1L, +20dB) to Headphone Output

14_Mono_Mic_Input_to_Headphone_Output.csv

15

Mono Diff Mic Input (AIN1L/AIN1R, +20dB) to

15_Mono_Diff_Mic_Input_to_Headphone_Output.csv

 

Headphone Output

 

16

Mono Mic Input (AIN1L, +20dB) to Speaker Output

16_Mono_Mic_Input_to_Speaker_Output.csv

 

 

 

Recording

 

 

 

 

 

17

Line Input (AIN3L/AIN3R)

17_ADC_Line_Input.csv

18

Mic Input (AIN1L/AIN1R, +20dB)

18_ADC_Mic_Input.csv

19

Mic Input (AIN1L/AIN1R, +20dB) with ALC

19_ADC_Mic_Input_with_ALC.csv

20

Mono Mic Input (AIN1L, +20dB)

20_ADC_Mono_Mic_Input.csv

21

Mono Mic Input (AIN1L, +20dB) with ALC

21_ADC_Mono_Mic_Input_with_ALC.csv

22

Mono Diff Mic Input (AIN1L/AIN1R, +20dB)

22_ADC_Mono_Diff_Mic_Input.csv

23

Mono Diff Mic Input (AIN1L/AIN1R, +20dB) with ALC

23_ADC_Mono_Diff_Mic_Input_with_ALC.csv

74

Reference .csv Files, Interfacing to DSPs, and Package Information

SBAU127 –July 2007

 

 

Submit Documentation Feedback

Image 74
Contents Users Guide Submit Documentation Feedback Contents 100 List of Figures Side List of Tables Submit Documentation Feedback About This Manual How to Use This Manual Information About Cautions and WarningsIf You Need Assistance FCC Warning Related Documentation From Texas InstrumentsAdditional Documentation TrademarksDescription Pin Assignments and Terminal FunctionsKey Features Introduction-PCM3793A/94AIntroduction-PCM3793A/94A Pin Assignments and Terminal Functions PCM3793A/94A Terminal FunctionsDEM-DAI3793A/3794A EVM System Diagram DEM-DAI3793A/3794A EVM DescriptionSBAU127 -July Getting Started Electrostatic Discharge Warning Unpacking the EVMDefault Configuration EVM ConfigurationMotherboard Daughter Card #2 DEM-TRVC/LPCSet-Up Guide User Interface Panel Basic Operating Set-UpSoftware Control and Operation Power On/Off Sequence Module Function ControlsPower Up/Down HP COM/MONO HPCPower Up/Down Time ms Options PCM3793A/94A Resistor 1257dh RES40 Resistor Value ControlRamp Up Wave Form with Default Setting Default Setting RecordDigital Out Mute Control Options Gain Control for ADC Input OptionsDigital Mute ATR Options Playback Playback Function Menu TabHeadphone Gain Control Options Speaker Gain Control OptionsALC Automatic Level Control Digital Attenuation ATP OptionsAuto Level Control Record Options Output Options Signal ProcessingSource Options Tone Control Options3D Effect Options Click Apply to Filter 1 or Apply to Filter15. Notch Filter Characteristic Model De-Emphasis Filter Options DAC Oversampling Control OptionsZero Cross Control Options High-Pass Filter OptionsAnalog Path 18. Analog Path Function Menu TabAnalog Mixer Options Analog Input OptionsD2S Select Options Mic Boost OptionsPG5 Gain and PG6 Gain Options Audio Interface Setting 1 OptionsAudio Interface Setting 2 Options Audio InterfaceHP Short Detection, L-Ch HP Detection, R-Ch HP Detection OptionsHP COM Short Detection Options Speaker Short Detection, L-Ch Speaker Short Detection, R-Ch4 LC89052T DIR Digital Audio I/F Receiver Control Window Digital AmplifierRegister Setting History 24. Register Setting History WindowModifying a .csv File 25. Opening and Modifying a .csv FileWrite function Register Direct AccessRead function Switches and Connectors Daughter Card #2 DIR LC89052T and DIT DIT4096Overview Main Power Supply and RegulatorPower-Supply Terminals for PCM3793A Power-Supply Pins MotherboardAudio I/O I/F Controller MSP430, TUSB3410Daughter Card #1 PCM3793A Analog Input and Output-Daughter Card #1Analog Output Configuration Daughter Card #1 Audio Clock and Input Data Control Format-Daughter Card #2 Daughter Card #2 DIR LC89052T and DIT DIT4096Analog Input and Output-Daughter Card #2 Evaluation and Measurements Slave Mode With Audio Precision SYS-2722 Default Setting Slave Mode Configuration With SYS-2722Jumper Configuration for Slave Mode Default Master Mode with Audio Precision SYS-2722 Master Mode Configuration With SYS-2722Jumper Configuration for Master Mode Combined Master and Slave Mode Configuration with SYS-2722 Combined Master and Slave Modes With PSIA-2722Measurements for Dynamic Characteristics Jumper Configuration for Combined Master and Slave ModesΩ Headphone Output Inserted in Headphone Jack J6 Digital-to-Analog D/A PerformanceD/A Line Output Parameters A/D Line Input Parameters Speaker Output Power PerformanceAnalog-to-Digital A/D Performance Stereo Speaker Output ParametersSpeaker Output Filter Configuration LC Low-Pass FilterResult BPZ Zero Data Input Result -60dB Input Amplitude Versus Frequency Performance4.1 A/D Spectrum 4.2 D/A Spectrum 11. D/A Amplitude vs FrequencyConnection Diagram for Practical Applications PCM3793A/94AFilter Consideration for Speaker Output 16. Recommended Ferrite Bead Filter for Speaker OutputSchematic, PCB Layout, and Bill of Materials Schematics PCM3793A DEM-PCM3793RHB-A Connector Daughter Card #1PCM3793A DEM-PCM3793RHB-A Daughter Card #1 Printed Circuit Board Layout PCM3793A DEM-PCM3793RHB-A Board Layout-Silkscreen SidePCM3793A DEM-PCM3793RHB-A Board Layout-Component Side PCM3793A DEM-PCM3793RHB-A Board Layout-Inner Layer PCM3793A DEM-PCM3793RHB-A Board Layout-Inner Layer PCM3793A DEM-PCM3793RHB-A Board Layout-Solder Side Component List Bill of MaterialsSubmit Documentation Feedback Appendix a Reference .csv Files Table A-1. .csv FilesRelated Signal Flow Diagrams Figure A-1. Line Output and Headphone OutputFigure A-2. Headphone Output with Sound Effect Figure A-3. Cap-Less Headphone Output Figure A-4. Headphone Output with Line Input AIN2L/AIN2R 0dB AIN3L MUX1 AIN2L AIN1L D2S AIN1R MUX2 AIN3R AIN2R Figure A-7. Stereo Speaker Output Figure A-8. Mono Speaker Output Figure A-9. Speaker Output with Line Input AIN2L/AIN2R Figure A-10. Speaker Output with Mono Mic Input AIN1L, +20dB +20dB Figure A-12. Line Input AIN2L/AIN2R to Headphone Output Figure A-13. Mono Line Input AIN2L to Headphone Output Figure A-14. Mono Mic Input AIN1L, +20dB to Headphone Output +20dB Figure A-16. Mono Mic Input AIN1L, +20dB to Speaker Output Figure A-17. Line Input AIN3L/AIN3R Figure A-18. Mic Input AIN1L/AIN1R, +20dB Figure A-19. Mic Input AIN1L/AIN1R, +20dB with ALC Figure A-20. Mono Mic Input AIN1L, +20dB Figure A-21. Mono Mic Input AIN1L, +20dB with ALC Figure A-22. Mono Diff Mic Input AIN1L/AIN1R, +20dB Figure A-23. Mono Diff Mic Input AIN1L/AIN1R, +20dB with ALC Figure A-24. Slave Mode Operation Interfacing to DSPsPackage Information Table A-2. Recommended Power-On Sequence for PCM3793ARegister Control with DSP Interface Evaluation BOARD/KIT Important Notice FCC WarningImportant Notice

DEM-DAI3793A specifications

The Texas Instruments DEM-DAI3793A is a versatile digital-to-analog converter (DAC) evaluation module designed for assessing the performance and capabilities of TI's DACs in various applications. This module features the high-performance DAC3793, which is widely recognized for its precision and flexibility, making it an ideal choice for audio, industrial automation, and communication systems.

One of the standout features of the DEM-DAI3793A is its ability to support a 16-bit resolution. This high resolution enables the module to provide fine granularity in signal representation, ensuring that even the most subtle changes in the input signal are accurately reflected in the output. The DAC3793 also boasts a high sampling rate, which is crucial for applications that require rapid signal processing and real-time data conversion.

The module incorporates advanced technologies such as dynamic element matching and integrated circuitry to minimize distortion and noise. These technologies are crucial for achieving high-fidelity audio playback and improving overall system performance. Additionally, the DEM-DAI3793A is designed to minimize power consumption while maintaining exceptional performance levels, making it suitable for battery-operated devices and energy-conscious applications.

Another significant characteristic of the DEM-DAI3793A is its ease of integration with various development environments. The evaluation module supports both hardware and software interfacing, allowing engineers to quickly prototype and test their designs. It comes equipped with a USB interface for seamless connectivity with computers, along with supporting software tools that facilitate the configuration and testing of the DAC's functionalities.

The DEM-DAI3793A is also designed with a robust set of output options, including differential and single-ended outputs. This flexibility allows for compatibility with a wide range of amplification and filtering circuits. Furthermore, the evaluation module is equipped with convenient power supply options, enabling it to operate in various settings without the need for extensive modifications.

In conclusion, the Texas Instruments DEM-DAI3793A is an exceptional evaluation module that showcases the capabilities of the DAC3793. With its high resolution, advanced technologies, ease of integration, and flexible output options, it serves as an indispensable tool for engineers and developers working on high-performance audio and data processing applications.