Zanussi ZHC605, ZHC705, ZHC905 manual Your Appliance Operating Instructions, Cooker Hood Controls

Page 4

YOUR APPLIANCE

OPERATING INSTRUCTIONS

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be installed to recirculate or extract contaminated air.

Cooker Hood Controls

The cooker hood functions are controlled by

three switches located on the underside of the hood immediately in front of the metal grease fi lters.

Worktop Lighting

The switch (L) marked with the lamp symbol operates the worktop lighting.

L0 - OFF

1 - ON

Fan Control

The switch (M) marked with the fan symbol and the switch (V) marked 1-2-3 operates the fan.

M0 - OFF

1 - ON

V1 - Low

2 - Normal

3 - Boost

0

1

0

1

1

2

3

L M V

4

Image 4
Contents Cooker Hood For the User For the Installer Maintenance and CleaningService Force Centres Operating InstructionsImportant Safety Information InstallationChild Safety Maintenance and ServiceYour Appliance Operating Instructions Cooker Hood ControlsWorktop Lighting Fan ControlTo Operate RecirculationExtraction Select the required fan speed and light if requiredMaintenance and Cleaning External CleaningMetal Grease Filters Remove the metal grease filters one at a time byTo Remove/Replace Charcoal Filters Charcoal FiltersChanging the Light Bulb Symptom Solution Service and Spare PartsSomething not Working Guarantee Conditions Installation Instructions Electrical ConnectionsElectrical Requirements Electrical ConnectionInstalling the Cooker Hood Installation RequirementsUnpacking Screws M4x2530 1/2 when installed above a slot-in gas cooker Clearance HeightBuilt-in Electric Hob Built-in Gas hobFitting the Wall Brackets Fitting the Canopy HoodRecirculation Mode Extraction DuctedFitting the Ducting 150Fitting the Upper Chimney Fitting the Lower Chimney43600252901