Making ice cubes, Defrosting the appliance

Making ice cubes

A plentiful supply of ice can be made in the two trays located above the ice servery. Fill the trays 3/ 4 full to allow the ice to expand.

To dispense the ice, fully turn the dial as shown in Fig. 11.

The cubes will fall easily from the trays, into the servery below.

Never consume ice-cubes which have just come out of the freezer. Their extremely low temperature can cause frost burns.

Fig. 11

3P 19

Overtemperature alarm and memory device

In the event of an abnormal temperature rise inside the freezer compartment (e.g. power cut) warning light (H) will start to ﬂash.

The alarm will continue to ﬂash even after the temperature has returned to normal; it is therefore quite possible to ﬁnd that the freezer temperature indicator may actually be showing the normal storage temperature values: ﬂashing of warning light (H) indicates that there has been a problem some time previously.

To stop it ﬂashing press button (G).

As soon as this is done, the alarm function is reset and the hottest temperature reached within the compartment, which has been memorised by the device, ﬂashes for 10 seconds on indicator (D).

After 10 seconds, indicator (D) resumes its normal thermometer function.

Defrosting the appliance

Defrosting of the freezer. Superchill and refrigerator is automatic.

The water is discharged, via pipes, into a tray located at the back of the appliance, above the compressor, where it evaporates.

Fig. 12

3P 18