Texas Instruments THS4150 manual Testing the EVM Setup, ±3. Driver 1 Output Signal

Page 20

2.4Testing the EVM Setup

1)Turn on the dc power supply.

2)Verify that both the +5 V (current meter 1) and the ±5 V (current meter 2) currents are below 20 mA.

Caution:

Currents above 20 mA indicate a possible short or a wrong resistor value on the PCB. Do not proceed until this situation is corrected.

3)Turn on the function generator.

4)Verify the oscilloscope is showing two 1 MHz sine waves with amplitude of ±0.125 V. The dc offset of the signal must be below 50 mV.

Note: VOUT+ and VOUT± should be 180 degrees out of phase. The internal attenuation of the scope should be set to 6 dB for a gain of one. Otherwise,

the output will show a gain of one-halfdue to the voltage division occurring at the 50-Ωtermination resistor.

Use Figure 3 as a reference for the input and output signals.

Figure 2±3. Driver 1 Output Signal

THS4150

C1

C2

C3

2-4

Using the THS4150 EVM

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Users Guide Important Notice Preface Trademarks Contents Figures Introduction and Description Evaluation Module Features DescriptionTHS4150 EVM Specifications Schematic of the Populated Circuit Default ConfigurationTHS4150 EVM Schematic ±2. SchematicAdditional Sample Schematics ±5. Vicr Level Shifter THS4150 EVM Layout ±7. Top Layer Silkscreen±9. Internal Plane Layer 2 Ground Plane ±11. Bottom Layer 4 Ground and Signal Introduction and Description Using the THS4150 EVM Power Supply Setup Required EquipmentInput and Output Setup ±2. Signal ConnectionsTesting the EVM Setup ±3. Driver 1 Output SignalPower Down Verification Measuring the Frequency ResponseButterworth Filter Butterworth FilterTHS4150 EVM Bill of Materials ±1. THS4150 EVM Bill of MaterialsP374CTR-ND General High-Speed Amplifier Design Considerations General High-Speed Amplifier Design Considerations

THS4150 specifications

Texas Instruments (TI) is renowned for its innovative analog and mixed-signal technologies, and one of its standout products in the operational amplifier domain is the THS4150. This high-speed, precision, voltage-feedback amplifier has garnered attention in various applications, particularly in high-frequency and low-noise environments.

One of the main features of the THS4150 is its impressive bandwidth. It boasts a bandwidth of 120 MHz, making it suitable for wideband signal amplification in applications like video processing, data conversion, and instrumentation. The amplifier also has a high slew rate of 1600 V/μs, enabling it to respond quickly to rapid signal changes. This characteristic is particularly crucial for applications where maintaining signal integrity is paramount.

The THS4150 operates with a supply voltage range from ±2.5 V to ±9 V, providing flexibility for designers looking to optimize power consumption and performance in battery-operated systems or other sensitive applications. Its low input offset voltage of 0.5 mV ensures accurate signal amplification, making it ideal for precision measurement systems.

Another noteworthy aspect of the THS4150 is its output drive capability. The amplifier can source and sink up to 200 mA of output current, allowing it to drive heavy loads without significant distortion. This feature is beneficial in driving capacitive loads and connecting directly to other stages in an analog signal chain.

In terms of technology, the THS4150 employs TI’s advanced bipolar process, which combines high-speed and low-noise characteristics essential for modern electronics. The amplifier is also designed to minimize power supply rejection, ensuring stable performance even under varying power supply conditions.

The device includes built-in protection features that accommodate various real-world scenarios, such as limited input voltage conditions and short circuits at the output. Consequently, this contributes to its reliability and robustness in demanding applications.

In summary, the Texas Instruments THS4150 is a high-performance voltage-feedback amplifier that stands out due to its wide bandwidth, high slew rate, low offset voltage, and strong output drive capability. These features make it a versatile choice for various applications, including high-speed data acquisition, video signal processing, and low-noise amplification. As designers seek to create sophisticated systems requiring reliable signal integrity and performance, the THS4150 is poised to be an invaluable component in their toolbox.
Top Page Image Contents