Instructions for the Installer

Technical data

Model/Type	ZK 20/10 R (ZLKF 301)		ZK 20/6 R (ZLKF 261)
Gross capacity (l)	Freezer:	105	Freezer:	65
	Refrigerator: 195		Refrigerator: 195

Net capacity (l)	Freezer:	80	Freezer:	51
	Refrigerator: 192		Refrigerator: 192
Width (mm)	600		600

Height (mm)	1790		1580

Depth (mm)	600		600
Energy consumption (kWh/24h)	1,42		1,20
(kWh/year)	518		438

Energy class, according to EU standards	C		C

Freezing capacity (kg/24h)	18		12

Rising time (h)	19		17

Rated power (W)	150		130
Weight (kg)	65		58

Number of compressors	1		1

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in original packaging, in vertical position

considering the protective warning on packaging.

After each transportation the appliance must not be switched on for approx. 2 hours.

Unpack the appliance and check if there are damages on it. Report possible damages immediately to the place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts not to move in the appliance.

Wash the inside of the appliance using lukewarm water and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy consumption and proper operation of the appliance. When placing, take into consideration that it is practical to operate the appliance between ambient temperature limits according to the climate class that is given in the chart below and can be found in the data label.

Class of climate	Ambient temperature

SN	+10 ... +32 °C

N	+16 ... +32 °C

ST	+18 ... +38 °C

If the ambient temperature goes below the lower data the temperature of the cooling compartment can go beyond the prescribed temperature.

If the ambient temperature goes beyond the upper data this means longer operating time of the compressor, breakdown in the automatic defrosting increasing temperature in the cooling compartment or increasing energy consumption.