Texas Instruments TAS5102EVM, TAS5103EVM manual Contents

Contents

1	Related Documentation from Texas Instruments		5
	1.1	Additional Documentation	5
2	Overview		5
	2.1	TAS5102EVM and TAS5103EVM Features	6
	2.2	PCB Key Map	6
3	Quick-Setup Guide		7
	3.1	Electrostatic Discharge Warning	7
	3.2	Unpacking the EVM	7
	3.3	Power Supply Setup	7
	3.4	GUI Software Installation	8
	3.5	Operational Sequence and Indicators	9
4	System Interfaces		9
	4.1	Power Supply (PSU) Interface (PVDD and GND)	9
	4.2	J1 Amplifier Connection to MC012 Controller Module	10
	4.3	Loudspeaker Connectors (J3 - J6)	10
	4.4	SPDIF Optical Input Connector	11
	4.5	SPDIF Co-Axial Input Connector	11
	4.6	USB Connector	11
5	Protection		11
	5.1	Short-Circuit Protection and Fault-Reporting Circuitry	11
	5.2	Fault Reporting	11
Appendix A Design Documents			12
	A.1	HPL-MC012 Schematic	12
	A.2	HPL-MC012 Composite Drawings	14
	A.3	TAS5102/3EVM Schematic	15
	A.4	TAS5102/3EVM Composite Drawings	16
	A.5	Heat Sink Drawing	19
	A.6	Parts List	19
	Important Notices		24

SLLU106–August 2008 Table of Contents 3

Submit Documentation Feedback