Grizzly H6247 instruction manual Operations, Grinding

OPERATIONS

Grinding

The Model H6247 is designed for meat processing. DO NOT attempt to grind bone or hard foods like nuts or fibrous foods like celery or ginger.

1.Make sure all meat grinding parts are properly sanitized before beginning. (Refer to the Cleaning section on page 9).

2.Install the fine or course cutting plate.

3.Cut all meats into sizes that will easily fit into the hopper throat.

4.Plug in the grinder and turn it ON.

5.Use meat pusher to push meat down to the feed screw. DO NOT use any other utensil or stick fingers down the hopper throat.

6.Feed the meat in the grinder steadily. Do not force it or cause the motor to labor.

The meat grinder can easily grind your fingers. Never use your fingers to push meat into the grinder. Always use the provided meat pusher.

-8-

If a jam occurs:

1.Rotate the REVERSE switch once or twice to attempt to free the jam.

If you cannot clear a jam by using the reverse switch:

1.UNPLUG THE GRINDER FROM THE POWER SOURCE!

2.Disassemble the grinding head and remove the material jamming the cut- ter or feed screw.

3.Assemble the grinder head and con- nect it to the power source.

4.Turn the motor ON and proceed with grinding.

Remove the grinder plug from the outlet before clearing any jams.

Model H6247 Meat Grinder