SECTION 4: OPERATIONS
Operation Safety
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all times to reduce this risk.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
G9922 (Mfg. since 12/01)
Basic Controls
Use the descriptions and figures below to become familiar with the basic controls of your machine.
ON/OFF Switch: Turns machine ON/OFF.
Table Tilt Lock Knob: Frees/Locks the table tilt.
ON/OFF Switch |
Table Tilt Lock Knob (x2) |
Figure 20. Basic controls. |
Miter Gauge: Allows workpiece sanding at spe- cific angles. Ideal for sanding straight edges on
Miter Gauge Lock Knob: Locks the miter gauge at the current angle.
Miter Gauge Lock Knob
Miter Gauge