Ball Oiler (Figure 39)
Lubricate the ball oilers after every 2 hours of use. Use a manual oiler (oil can) filled with ISO 68 or SAE 30W
To lubricate the ball oiler:
1.DISCONNECT SANDER FROM POWER!
2.Look towards the spindle shaft behind the rubber dust cover (Figure 39).
Step 4.
Step 3.
3.Rotate the sanding drum by hand until it moves up enough to expose the ball oiler.
4.Insert the tip of the oil can into the ball oiler. Depress the ball with the tip of the oil can nozzle and squirt a little oil inside the fitting.
Ball Oiler