Texas Instruments TAS5508-5121K8EVM Power Supply PSU Interface J70, J71, and J73, Recommendations

Page 14

Power Supply (PSU) Interface (J70, J71, and J73)

2.1 Power Supply (PSU) Interface (J70, J71, and J73)

The TAS5508−5121K8EVM module must be powered from external power supplies. High-end audio performance requires a stabilized power supply with low ripple voltage and low output impedance.

Note:

The length of the power supply cable must be minimized. Increasing length of PSU cable is equal to increasing the distortion for the amplifier at high output levels and low frequencies.

The maximum output-stage supply voltage depends of the speaker load resistance. Check the recommended maximum supply voltage in the TAS5121 data sheet (SLES086).

Table 2−1. Recommended Supply Voltages

 

Voltage Limitations

Current

Description

(4-Wload)

Recommendations

 

 

 

System power supply

15 – 20 V

0.3 A

 

 

 

Output-stage power supply

0 – 30.5 V

6 A†

†The rated current corresponds to 2-channel full scale (80 W each), which most likely is adequate for a standard 8-channel amplifier design.

The recommended TAS5121 power-up sequence is shown in Figure 2−1. For proper TAS5121 operation, the RESET signal should be kept low during power up. RESET is pulled low during power up for 200 ms by the onboard reset generator (U73).

Figure 2−1. Recommended Power-Up Sequence

System power supply

Output stage power supply

RESET

> 1 ms

Figure 2−2. J71 and J70 Pin Numbers

System Power Supply

4

3

2

1

(PCB connector top view)

2-2

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User’s Guide Important Notice Products ApplicationsEvaluation BOARD/KIT Important Notice FCC WarningEVM Warnings and Restrictions Read This First About This ManualRelated Documentation From Texas Instruments Part Number Literature NumberContents Figures TablesTAS5508−5121K8EVM Features PCB Key Map OverviewTAS5508−5121K8EVM Features −1. Integrated PurePath Digital EAmplifier SystemPCB Key Map −2. Physical Structure for TAS5508−5121K8EVM Rough OutlinePage System Interfaces Voltage Limitations Current Description Power Supply PSU Interface J70, J71, and J73−1. Recommended Supply Voltages Recommendations−3. J70 Pin Description Pin No Net-Name at Schematics Description−2. J71 Pin Description −4. J73 Pin Description−5. J72 Pin Description Loudspeaker Connectors J100 . . . J800Line Out Connectors J950 and J951 −6. J100 . . . J800 Pin DescriptionHeadphone Select J32 Headphone Connector J900Line Output Select J50 −8. J900 Pin Description−11. J30 Pin Description Pin Net-Name at Schematics DescriptionControl Interface J30 Digital Audio Interface J40 −12.J40 Pin DescriptionPage Protection Short-Circuit Protection and Fault-Reporting Circuitry −1. Channel Allocation Device Fault Reporting−2. TAS5121 Warning/Error Signal Decoding OTW

TAS5121, TAS5508-5121K8EVM specifications

The Texas Instruments TAS5508-5121K8EVM is an advanced evaluation module that features the TAS5121 audio amplifier, designed to demonstrate the capabilities of TI’s innovative audio processing technology. This module is a key resource for engineers looking to explore high-performance audio systems and seamless integration into their product designs.

One of the main features of the TAS5508-5121K8EVM is its ability to deliver high-quality digital audio amplification. The TAS5121 DAC (digital-to-analog converter) is featured prominently, supporting various digital audio interfaces such as I2S and PCM. This flexibility allows designers to interface the device with a wide range of digital signal processors and microcontrollers.

The TAS5121 incorporates a Class-D amplification architecture that significantly enhances audio performance while maintaining energy efficiency. Class-D amplifiers are known for their high efficiency, which translates to less heat generation and reduced power consumption compared to traditional linear amplifiers. This is particularly important in portable or battery-operated applications, where power management is crucial.

The evaluation module supports up to 128 watts of output power per channel, making it suitable for demanding audio applications such as home theater systems, professional audio equipment, and automotive sound systems. The TAS5121 is designed to operate at various load impedances, thus ensuring optimal sound quality across different speaker types.

The TAS5508-5121K8EVM also features integrated diagnostic capabilities that allow users to monitor the system's performance in real time. Built-in protections against over-temperature and over-current conditions contribute to the device’s robustness, making it suitable for long-term applications in diverse environments.

Moreover, the evaluation module supports seamless integration with TI’s PurePath™ platform, which enhances digital audio processing through advanced algorithms. These technologies promote superior sound reproduction, allowing users to take advantage of dynamic range control and equalization features.

In summary, the Texas Instruments TAS5508-5121K8EVM with the TAS5121 audio amplifier is an essential tool for audio engineers and designers. Its combination of digital audio processing, Class-D amplification, robust diagnostic features, and support for high output power make it a versatile solution for a range of high-performance audio applications. As technology continues to evolve, this evaluation module serves as a reliable foundation for developing next-generation audio products.
Top Page Image Contents