Texas Instruments TAS5508-5121K8EVM, TAS5121 manual EVM Warnings and Restrictions

Page 4

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of 0–29.5 V and the output voltage range of 15–20 V for the system supply.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than 75°C. The EVM is designed to operate properly with certain components above 75°C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User’s Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Copyright ♥ 2006, Texas Instruments Incorporated

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User’s Guide Important Notice Products ApplicationsEvaluation BOARD/KIT Important Notice FCC WarningEVM Warnings and Restrictions Read This First About This ManualRelated Documentation From Texas Instruments Part Number Literature NumberContents Figures TablesTAS5508−5121K8EVM Features PCB Key Map OverviewTAS5508−5121K8EVM Features −1. Integrated PurePath Digital EAmplifier SystemPCB Key Map −2. Physical Structure for TAS5508−5121K8EVM Rough OutlinePage System Interfaces Power Supply PSU Interface J70, J71, and J73 −1. Recommended Supply VoltagesVoltage Limitations Current Description RecommendationsPin No Net-Name at Schematics Description −2. J71 Pin Description−3. J70 Pin Description −4. J73 Pin DescriptionLoudspeaker Connectors J100 . . . J800 Line Out Connectors J950 and J951−5. J72 Pin Description −6. J100 . . . J800 Pin DescriptionHeadphone Connector J900 Line Output Select J50Headphone Select J32 −8. J900 Pin DescriptionControl Interface J30 Pin Net-Name at Schematics Description−11. J30 Pin Description Digital Audio Interface J40 −12.J40 Pin DescriptionPage Protection Short-Circuit Protection and Fault-Reporting Circuitry Device Fault Reporting −2. TAS5121 Warning/Error Signal Decoding−1. Channel Allocation OTW

TAS5121, TAS5508-5121K8EVM specifications

The Texas Instruments TAS5508-5121K8EVM is an advanced evaluation module that features the TAS5121 audio amplifier, designed to demonstrate the capabilities of TI’s innovative audio processing technology. This module is a key resource for engineers looking to explore high-performance audio systems and seamless integration into their product designs.

One of the main features of the TAS5508-5121K8EVM is its ability to deliver high-quality digital audio amplification. The TAS5121 DAC (digital-to-analog converter) is featured prominently, supporting various digital audio interfaces such as I2S and PCM. This flexibility allows designers to interface the device with a wide range of digital signal processors and microcontrollers.

The TAS5121 incorporates a Class-D amplification architecture that significantly enhances audio performance while maintaining energy efficiency. Class-D amplifiers are known for their high efficiency, which translates to less heat generation and reduced power consumption compared to traditional linear amplifiers. This is particularly important in portable or battery-operated applications, where power management is crucial.

The evaluation module supports up to 128 watts of output power per channel, making it suitable for demanding audio applications such as home theater systems, professional audio equipment, and automotive sound systems. The TAS5121 is designed to operate at various load impedances, thus ensuring optimal sound quality across different speaker types.

The TAS5508-5121K8EVM also features integrated diagnostic capabilities that allow users to monitor the system's performance in real time. Built-in protections against over-temperature and over-current conditions contribute to the device’s robustness, making it suitable for long-term applications in diverse environments.

Moreover, the evaluation module supports seamless integration with TI’s PurePath™ platform, which enhances digital audio processing through advanced algorithms. These technologies promote superior sound reproduction, allowing users to take advantage of dynamic range control and equalization features.

In summary, the Texas Instruments TAS5508-5121K8EVM with the TAS5121 audio amplifier is an essential tool for audio engineers and designers. Its combination of digital audio processing, Class-D amplification, robust diagnostic features, and support for high output power make it a versatile solution for a range of high-performance audio applications. As technology continues to evolve, this evaluation module serves as a reliable foundation for developing next-generation audio products.
Top Page Image Contents