Texas Instruments TAS5508-5121K8EVM manual Short-Circuit Protection and Fault-Reporting Circuitry

Page 22

Short-Circuit Protection and Fault-Reporting Circuitry

3.1 Short-Circuit Protection and Fault-Reporting Circuitry

The TAS5121 is a self-protecting device that provides device fault reporting (including high-temperature protection and short-circuit protection). The TAS5121 is configured in back-end auto-recovery mode and, therefore, resets automatically after all errors (M1, M2, and M3 is set low). This means that the device restarts itself after an error occasion and reports shortly through SD1 and SD2 error signals.

The shutdown report signals are separated into two wires, SD1 and SD2. SD1 covers the primary information channels (front channels and center), where the SD2 covers the secondary information channels (rear channels, surround/line out channels, and subwoofer). Therefore, a microprocessor can react differently on errors depending on primary or secondary channels faults, e.g., lowering the output level or shutting down the secondary channels on continues error reporting from one of those, where the primary channels continue.

3-2

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s Guide Important Notice Products ApplicationsEvaluation BOARD/KIT Important Notice FCC WarningEVM Warnings and Restrictions Read This First About This ManualRelated Documentation From Texas Instruments Part Number Literature NumberContents Figures TablesTAS5508−5121K8EVM Features PCB Key Map OverviewTAS5508−5121K8EVM Features −1. Integrated PurePath Digital EAmplifier SystemPCB Key Map −2. Physical Structure for TAS5508−5121K8EVM Rough OutlinePage System Interfaces Voltage Limitations Current Description Power Supply PSU Interface J70, J71, and J73−1. Recommended Supply Voltages Recommendations−3. J70 Pin Description Pin No Net-Name at Schematics Description−2. J71 Pin Description −4. J73 Pin Description−5. J72 Pin Description Loudspeaker Connectors J100 . . . J800Line Out Connectors J950 and J951 −6. J100 . . . J800 Pin DescriptionHeadphone Select J32 Headphone Connector J900Line Output Select J50 −8. J900 Pin DescriptionControl Interface J30 Pin Net-Name at Schematics Description−11. J30 Pin Description Digital Audio Interface J40 −12.J40 Pin DescriptionPage Protection Short-Circuit Protection and Fault-Reporting Circuitry −1. Channel Allocation Device Fault Reporting−2. TAS5121 Warning/Error Signal Decoding OTW

TAS5121, TAS5508-5121K8EVM specifications

The Texas Instruments TAS5508-5121K8EVM is an advanced evaluation module that features the TAS5121 audio amplifier, designed to demonstrate the capabilities of TI’s innovative audio processing technology. This module is a key resource for engineers looking to explore high-performance audio systems and seamless integration into their product designs.

One of the main features of the TAS5508-5121K8EVM is its ability to deliver high-quality digital audio amplification. The TAS5121 DAC (digital-to-analog converter) is featured prominently, supporting various digital audio interfaces such as I2S and PCM. This flexibility allows designers to interface the device with a wide range of digital signal processors and microcontrollers.

The TAS5121 incorporates a Class-D amplification architecture that significantly enhances audio performance while maintaining energy efficiency. Class-D amplifiers are known for their high efficiency, which translates to less heat generation and reduced power consumption compared to traditional linear amplifiers. This is particularly important in portable or battery-operated applications, where power management is crucial.

The evaluation module supports up to 128 watts of output power per channel, making it suitable for demanding audio applications such as home theater systems, professional audio equipment, and automotive sound systems. The TAS5121 is designed to operate at various load impedances, thus ensuring optimal sound quality across different speaker types.

The TAS5508-5121K8EVM also features integrated diagnostic capabilities that allow users to monitor the system's performance in real time. Built-in protections against over-temperature and over-current conditions contribute to the device’s robustness, making it suitable for long-term applications in diverse environments.

Moreover, the evaluation module supports seamless integration with TI’s PurePath™ platform, which enhances digital audio processing through advanced algorithms. These technologies promote superior sound reproduction, allowing users to take advantage of dynamic range control and equalization features.

In summary, the Texas Instruments TAS5508-5121K8EVM with the TAS5121 audio amplifier is an essential tool for audio engineers and designers. Its combination of digital audio processing, Class-D amplification, robust diagnostic features, and support for high output power make it a versatile solution for a range of high-performance audio applications. As technology continues to evolve, this evaluation module serves as a reliable foundation for developing next-generation audio products.
Top Page Image Contents