Volt white supply wire | Faber INCA PRO 38 RB specification

2.The entire bottom of the rangehood must be removed for installation as indicated in FIGURE 6. Remove the grease ﬁlters USING TWO HANDS (one to hold the ﬁlter so that it doesn't fall on cooktop and one to turn the knob (A in FIGURE 7) by pulling the knob out and turning to the left.

FIGURE 6

3.Remove the grease ﬁlter divider (B in FIGURE 7) by ﬁrst removing the plastic screw cover (C in FIGURE 7), then removing the phillips screw under the screw cover.

	A
C	C

FIGURE 7

4.Remove the two philips screws (D in FIGURE 8). Remove the entire

bottom of the rangehood by pushing your thumb into the side holes (E in FIGURE 8) and pulling the sides free from the rangehood.

FIGURE 8
	D
X	X
	E

5. Fix the rangehood to the cabinet or custom hood using the four spring loaded brackets, two on each side of the rangehood. Using a philips screwdriver or drill, tighten the adjustment screws (F in FIGURE 9) until the brackets adhere tightly to the surface.

6.IMPORTANT: There are 12 holes (G in FIGURE 9) for screws (not provided) to reinforce the rangehood to your cabinet or custom hood. Use screws appropriate for the size and type of materials of your cabinet or custom hood.

		G
X	X		X	X
X				X
G		F		G
G				G
X				X
		G
		FIGURE 9

7.If the optional remote wall control switch is being used, please follow the instructions included with the remote wall switch pack- age. After following those instructions, skip to step #9 below. If the optional wall control switch is not being used, continue to step #8 below.

8.Remove the wiring box cover by removing the two screws. (See FIGURE 10 for reference) Insert the cable of the remote blower into the knockout hole of the rangehood. Insert the power supply cable into the hole of the rangehood. Connect the green ground wire from the power supply to the ground screw. Connect the green ground wire from the remote blower to the other green ground screw. Con- nect the black remote blower motor wire to the brown rangehood wire with a twist-on wire connector. Next connect together with a twist-on wire connector the following wires: - white remote blower motor wire

- white rangehood wire - violet rangehood wire

- 120-volt white supply wire

Connect the black power supply wire to the black rangehood wire with a twist-on connector. Replace the wiring box cover. Tighten the

screw securely. Reinstall the bafﬂe ﬁlters. Reconnect the power.

Twist on wire connectors should be suitable for connecting multiple wires of different sizes together.

9.Replace the bottom of the rangehood and reinsert the grease ﬁlter divider and grease ﬁlters.

10.Connect the ductwork to the rangehood and seal all connections with duct tape.

11.Turn the power supply on. Turn on the blower and light. If the rangehood does not operate, check that the circuit breaker is not tripped or the house fuse blown. If the unit still does not operate, disconnect the power supply and check that the wiring connections have been made properly.

	��	��
	��	��
��	��	��
	��	��	��
		��

��			��
��			��
��			��
��
��
��
��
��		��
		��
	��	��
	��	��
		��
	FIGURE 10

Version 06/06 - Page 7

INCA PRO 38 RB specifications

The Faber INCA PRO 38 RB is a sophisticated range hood that combines powerful ventilation with stylish design, making it an excellent addition to modern kitchens. It stands out due to its impressive blend of aesthetics and functionality, ensuring that the cooking environment remains fresh and clean while enhancing the overall kitchen decor.

One of the key features of the INCA PRO 38 RB is its powerful motor. With a maximum extraction rate that can handle even the most demanding cooking tasks, this range hood efficiently removes smoke, steam, and odors from the kitchen, maintaining a comfortable cooking atmosphere. The range hood is equipped with three-speed settings, allowing users to adjust the airflow according to their cooking needs. Whether you are simmering a delicate sauce or frying foods that produce more smoke, Faber offers the flexibility to adapt ventilation to the intensity of each task.

The design of the INCA PRO 38 RB is a blend of modern aesthetics and practicality. Featuring a sleek, stainless-steel finish, it adds a touch of elegance to any kitchen design. The lightweight and compact design makes it suitable for various kitchen layouts without taking up too much space.

The hood employs advanced technologies for enhanced noise reduction, ensuring a quieter operation, so you can enjoy conversation and music while cooking. Additionally, the INCA PRO 38 RB comes with high-efficiency LED lighting, which not only illuminates the cooking area for precision but also adds an energy-efficient lighting solution.

Installation flexibility is also an important characteristic of the Faber INCA PRO 38 RB. It can be installed as a ducted or recirculating system, making it versatile for different kitchen setups. This versatility helps in adapting to various kitchen designs and ventilation requirements, further enhancing its appeal to homeowners and designers alike.

The grease filters in the INCA PRO 38 RB are easy to clean and are designed to capture grease effectively, ensuring that the air remains clean and free of contaminants. With its combination of advanced features, stylish design, and user-friendly operation, the Faber INCA PRO 38 RB remains a leading choice for those seeking a high-performance range hood that complements modern kitchen aesthetics while delivering exceptional performance.