Hunter Fan 83006 manual Trouble Shooting, Solution

Page 19

Trouble Shooting

Problem: Fan does not come on.

Solution:

Hunter Fan Bath Ventilators are extremely quiet. To confirm that the fan is running, place your hand near the vents to feel the air movement.

Turn power on, replace fuse, or reset breaker.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Light does not come on.

Solution:

Replace the light bulb with a new bulb.

Turn power on, replace fuse, or reset breaker.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Fan is noisy.

Solution:

Check and tighten all fasteners.

Check the glass to make sure it is secure.

Check the flapper to make sure it moves freely.

If you need parts or service assistance, please call 888-830-1326 or visit us at our WEB site at http://www.hunterfan.com.

41954-01 3/13/2006

HF0022_Eng_3.13.06.indd 19

19

3/12/06 6:03:35 PM

Image 19
Contents Installation I d e Preventative Maintenance X2 D Before InstallationRemove the motor/blower from the housing A12 A15 A14A19 A18A21 A22 B15 B11B12 B13B19 B17B20 B26 B27 B22B23 B24C14 Existing Construction accessible from aboveC11 C13 C12C17 C15C16C22 C21C23 C28 C25 C26C29 D13 Existing Construction accessible only from belowD11 D12D17 D18 D16D19 D23 D22Attaching the Grille Screw glass dome into position Solution Trouble ShootingLimited Warranty WarrantyÍ a S t a l a c i ó n DesdePrecaución Llame al Para un reemplazo Antes de la instalaciónHF0022Sp3.13.06.indd 12/06 60048 PM Construcción nueva fijación a la viga Tienda los cables a través del alivio de tension Vaya al paso A21De pulg Construcción nueva suspendido entre vigasApriete los tornillos B23 B26Construcción existente accesible desde arriba SIN Ventilador ExistenteTaladre un agujero en el centro de cada perfil Apriete los tornillos del aliviador de tensiones Vaya al paso En la página 37 para Fijar la rejilla Construcción existente accesible sólo desde abajo D20 Retire los tornillos de mano Fijación de la rejillaEnrosque el dome vidrio en su posición Solución Solución de problemasGarantía Limitada Garantía