Fujioh FSR-3600, FSR-4200 manual Re-assembling, Replacing the Light Bulb, Range Hood Body

2 Rectifier Baffle Panel

Wash the Rectifier Baffle Panel in tepid water with a mild detergent dissolved. After washing, wipe it off thoroughly with a dry cloth.

3 Range Hood Body

After wiping the range hood body off with a cloth immersed in a mild detergent and wring tightly, wipe off moisture thoroughly with a dry cloth.

Re-assembling

Re-assembly will be done by following the opposite way of disassembly procedures described in Item “Disassembling”.

(1)Make sure that the filter, Rectifier Baffle Panel, oil catch tray, etc. are fixed in the appropriate positions firmly.

(2)Make sure that there is no abnormal vibration sound when running.

Replacing the Light Bulb

Two 60 W light bulbs can be installed to this range hood.

Prior to replacing the light bulb, purchase a halogen or ordinary mini-light bulb (in the base diameter 26 mm), rated 120 V - 60 W or below.

1 Remove the Rectifier Baffle Panel (refer to “Disassembling” ).

NOTE: As the panel may have grease build,

be careful when removing it.

2

3

Replace the light bulb with a new one.

Fasten the two screws firmly after re- assembling the Rectifier Baffle Panel.

8