Zanussi ZCOF636X manual

•Warning:

-Connect the power supply cable of suitable dimensions before securing the power supply unit.

-Assemble the runners on the sides of the machine (using the screws supplied) as shown in fig.1.

-Fasten the telescopic runner supports (RH and LH) using three wood screws (fig.2) and taking care to follow the measurements shown in fig.2.

-Make a slot in the bottom of the open compartment following the measurements given in fig.2.

-If the compartment does not have a shelf for the machine to rest on, assemble the machine fixing bracket (ref.29) as shown in fig.4. Place screw 1 in the slot of the bracket and adjust the position before locking in place using screw 2.

-Fasten the power supply unit (fig.3) to the back of the appliance in the top left-hand corner using two wood screws as shown in fig.2.

Fig. 2

Fig. 1

13