WATER SUPPLY
•Take the lid off the water tank (ref.27) and take out the Brita filter.
•Take the filter out of the packaging and soak it in cold water for half an hour before fitting it firmly into the hole in the tank (fig.6).
•Place the water hose in the relative channel (fig.7) and push it down until it reaches the bottom of the tank (fig.8).
•Fill the tank with cold water.
•Warning: only fill the tank with cold drinking
water only: do not pour milk or any other liquid into the tank!
•The Brita filter is available at shops selling household appliances, or your local Service Centre.
Fig. 6
Fig. 7
Fig. 8
15