Zanussi ZCG 640, ZCG 641 manual Oven Cavity, Oven Shelves, Replacing the Oven Light

Page 11

Oven Cavity

The enamelled oven cavity is best cleaned whilst the oven is still warm.

Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.

Oven Shelves

To clean the oven shelves, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.

Replacing the Oven Light

Disconnect the appliance from the electricity supply.

If the oven bulb needs replacing, it must comply with the following specifications:

-Electric power: 25W,

-Electric rate: 230V (50 Hz),

-Resistant to temperatures of 300°C,

-Connection type: E14.

These bulbs are available from your local Service Force Centre.

￿To replace the faulty bulb:

1.Ensure the oven is disconnected from the electrical supply.

2.Turn the glass cover anticlockwise.

3.Remove the faulty bulb and replace it with the new one.

4.Refit the glass cover.

5.Reconnect to the electrical supply.

11

Image 11
Contents GAS Cooker Important Safety Information Contents Control Panel Oven Cavity AccessoriesOven light push button Gas Hob ControlsGas Oven and Electric Grill Control Oven Function Control KnobAlways cook with the oven door closed Using the OvenMinute Minder Before the First Use of the CookerHints and Tips Using the Gas ovenYeast Mixtures Gas Oven Cooking ChartFood Temperatures Shelf Cooking Position Time Puddings CakesHints and Tips How to Use the GrillCooking chart GrillingCleaning the Oven Maintenance and CleaningDisconnect the appliance from the electricity supply Oven CavityOven Shelves Replacing the Oven Light0870 5 Service and Spare PartsSymptom Solution Something Not WorkingCustomer Care Department Guarantee ConditionsZanussi guarantee conditions Customer Care DepartmentDimensions Oven Instructions for the InstallerImportant Safety Requirements Technical Data HobThis appliance cannot be positioned on a base InstallationPositioning the Appliance Fig Fitting the Stability Bracket Not supplied Connecting to GasThis Cooker Must be Earthed Electrical connectionsPermanent Connection Commissioning ProcedureReplacement of gas hob burner nozzles Minimum level adjustment of gas hob burnersMinimum level adjustment of gas oven burner Replacement of gas oven burner nozzleCustomer Care