Zanussi DX 6452 manual Starting a washing programme

Page 14

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

b)Press the On/Off button (in this case all the indicator lights turn off). Press the On/Off button again; the programme will start from the point at which it was interrupted.

3.Close the dishwasher door

4.Press the On/Off button

The On/Off indicator light will come on.

5.Setting and starting the programme

a)Press the button corresponding to the required programme (see "Washing programmes" chart). The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking.

After about 3 seconds from the last pressure of a button the programme starts automatically.

Once the programme has started the phase indicator lights will turn off except for the phase under way.

b)If you want to set the "delay start" of a washing programme:

Set the delay start before selecting a washing programme.

Press the "delay start" button until the indicator light corresponding to the chosen hours flashes (3h, 6h or 9h)

Press the button corresponding to the required programme (see "Washing programmes" chart).

After about 3 seconds from the last pressure of a button the countdown starts automatically.

The countdown will decrease with steps of 3 hours. The opening of the door will not modify or interrupt the countdown.

Once the delay start has elapsed the programme will start automatically.

Note: it is possible to select a washing programme and the "delay start" also with the door slightly opened.

In this case the start of the programme or of the countdown will occur after the closure of the door.

a)Press On/Off button.

b)Select a washing programme and if required the "delay start".

c)Close the door.

The programme or the countdown will start automatically after about 3 seconds from the closure of the door.

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To cancel a washing programme in progress

To cancel a washing programme in progress, press simultaneously the function buttons 2 and 3 until all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

7. Cancelling the "delay start" in progress

It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start button until the indicator lights corresponding to the delay start hours (3h, 6h or 9h) turn off.

In this case the selected washing programme will start automatically after a 3 seconds.

8 . End of the washing programme

The dishwasher will automatically stop and the End of programme phase indicator light will illuminate.

The indicator light of the programme just ended will remain on.

Switch off the dishwasher by pressing the On/Off button, the On/Off indicator light turns off.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

14

Image 14
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Control panel Setting electronically Prior to using for the first timeSetting manually Water softenerFilling with dishwasher salt To fillFilling with rinse aid Adjusting the doseRinse aid Deactivation/activation of the rinse aid dispenserLower basket Daily useLoading cutlery and dishes Cutlery basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket With upper basket raised 20 cmUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes Starting a washing programme Frost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Page From the Electrolux Group. The World’s No.1 choice

DX 6452 specifications

The Zanussi DX 6452 is an exceptional dishwasher that combines performance, efficiency, and versatility, making it an ideal choice for households of varying sizes. With its well-thought-out design and advanced features, it aims to streamline the dishwashing process while ensuring sparkling results.

One of the main features of the Zanussi DX 6452 is its impressive capacity. It can accommodate up to 13 place settings in a single load, making it perfect for families or those who frequently entertain guests. The adjustable upper basket allows users to customize the interior space, enabling the accommodation of larger pots or pans alongside regular dinnerware.

In terms of performance, the Zanussi DX 6452 boasts a variety of wash programs tailored to different needs. The Eco setting is designed for energy efficiency, using minimal water and electricity, which not only conserves resources but also lowers utility bills. Other options include intensive washes for heavily soiled dishes and quick cycles for when time is of the essence. The machine also features a half-load option, allowing for flexible washing without wasting resources.

The appliance is equipped with cutting-edge technology that enhances its functionality. The A++ energy rating ensures that it operates with optimal efficiency, reducing the environmental impact while maintaining performance. Additionally, its UltraClean technology targets tough stains, ensuring that even the dirtiest dishes emerge spotless.

Another notable characteristic is the quiet operation of the Zanussi DX 6452. With a noise level of just 47 decibels, it runs quietly in the background, making it suitable for open-plan living spaces or late-night cleaning. The delay start feature allows users to program the dishwasher to run at a more convenient time, such as overnight, to take advantage of off-peak energy rates.

Safety is always a priority in modern appliances, and the Zanussi DX 6452 is no exception. It includes a child lock feature to prevent any accidental operation, providing peace of mind in households with young children.

In summary, the Zanussi DX 6452 stands out for its efficient design and numerous smart features. With impressive capacity, customizable wash programs, and advanced technologies, it delivers reliable performance while promoting eco-friendliness. This dishwasher is an excellent addition to any kitchen, simplifying dishwashing chores and ensuring dishes come out sparkling clean every time.