Zanussi DX 6452 Installation instructions, Fitting under a counter, Levelling, Proceed as follows

Page 20

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

20

Image 20
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Control panel Prior to using for the first time Setting manuallySetting electronically Water softenerFilling with dishwasher salt To fillAdjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Cutlery basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows With upper basket raised 20 cmUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Maintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Page From the Electrolux Group. The World’s No.1 choice

DX 6452 specifications

The Zanussi DX 6452 is an exceptional dishwasher that combines performance, efficiency, and versatility, making it an ideal choice for households of varying sizes. With its well-thought-out design and advanced features, it aims to streamline the dishwashing process while ensuring sparkling results.

One of the main features of the Zanussi DX 6452 is its impressive capacity. It can accommodate up to 13 place settings in a single load, making it perfect for families or those who frequently entertain guests. The adjustable upper basket allows users to customize the interior space, enabling the accommodation of larger pots or pans alongside regular dinnerware.

In terms of performance, the Zanussi DX 6452 boasts a variety of wash programs tailored to different needs. The Eco setting is designed for energy efficiency, using minimal water and electricity, which not only conserves resources but also lowers utility bills. Other options include intensive washes for heavily soiled dishes and quick cycles for when time is of the essence. The machine also features a half-load option, allowing for flexible washing without wasting resources.

The appliance is equipped with cutting-edge technology that enhances its functionality. The A++ energy rating ensures that it operates with optimal efficiency, reducing the environmental impact while maintaining performance. Additionally, its UltraClean technology targets tough stains, ensuring that even the dirtiest dishes emerge spotless.

Another notable characteristic is the quiet operation of the Zanussi DX 6452. With a noise level of just 47 decibels, it runs quietly in the background, making it suitable for open-plan living spaces or late-night cleaning. The delay start feature allows users to program the dishwasher to run at a more convenient time, such as overnight, to take advantage of off-peak energy rates.

Safety is always a priority in modern appliances, and the Zanussi DX 6452 is no exception. It includes a child lock feature to prevent any accidental operation, providing peace of mind in households with young children.

In summary, the Zanussi DX 6452 stands out for its efficient design and numerous smart features. With impressive capacity, customizable wash programs, and advanced technologies, it delivers reliable performance while promoting eco-friendliness. This dishwasher is an excellent addition to any kitchen, simplifying dishwashing chores and ensuring dishes come out sparkling clean every time.