Zanussi DX 6452 Prior to using for the first time, Water softener, Setting manually

Page 6

Prior to using for the first time

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with dishwasher salt

5.Fill the rinse aid dispenser

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees and mmol/l (millimol per litre).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the function push buttons on the control panel.

a) Setting manually

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4.Replace the lower basket.

b) Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1. Press the On/Off button. The On/Off indicator light

illuminates (setting mode).

If a programme button indicator light is on, this means that

a washing programme has been set. The programme must

be cancelled: press simultaneously the function buttons 2

and 3 for about 2 seconds.

All the indicator lights will turn off (except for the On/Off

indicator light and eventually salt and rinse aid indicator

lights) indicating that the set programme has been

cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the

indicator lights of the function buttons 1, 2 and 3 start

flashing.

3. Press the function button 1, the indicator lights of function

buttons 2 and 3 turn off while the indicator light of the

button 1 goes on flashing, at the same time the indicator

light END starts to flash.

The current level is indicated by the number of flashes of

the indicator light END (see chart).

Example: 5 flashes = level 5

4. To change the level, press button 1. Each time the button is

pressed the level changes. (For the selection of the new

level see the chart).

Examples:

if the current level is 5, by pressing button 1 once, level 6 is

selected.

if the current level is 10, by pressing button 1 once, level 1

The dishwasher is factory set at position 2.

AA07

is selected.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after

which the dishwasher will automatically return to setting

mode.

 

Water hardness

 

Adjusting the water

Number of

Use

 

 

 

 

Clarke

°TH

mmol/l

Range

hardness setting

flashes of the

of salt

degrees

(french degrees)

(millimol per litre,

 

 

 

"END"

 

international unit for the

 

 

 

 

 

 

hardness of water)

 

manually

electronically

indicator light

 

 

 

 

 

 

 

 

 

64 - 88

91 - 125

9,0 - 12,5

IV

2

level 10

10

yes

 

 

 

 

 

 

 

 

53 - 63

76 - 90

7,6- 8,9

IV

2

level 9

9

yes

 

 

 

 

 

 

 

 

46 - 52

65 - 75

6,5 - 7,5

IV

2

level 8

8

yes

 

 

 

 

 

 

 

 

36 - 45

51 - 64

5,1 - 6,4

IV

2

level 7

7

yes

 

 

 

 

 

 

 

 

28 - 35

40 - 50

4,0 - 5,0

IV

2

level 6

6

yes

 

 

 

 

 

 

 

 

23 - 27

33 - 39

3,3 - 3,9

III

2

level 5

5

yes

 

 

 

 

 

 

 

 

18 - 22

26 - 32

2,6 - 3,2

III

1

level 4

4

yes

 

 

 

 

 

 

 

 

13 - 17

19 - 25

1,9 - 2,5

II

1

level 3

3

yes

 

 

 

 

 

 

 

 

5 - 12

7 - 18

0,7 - 1,8

I/II

1

level 2

2

yes

 

 

 

 

 

 

 

 

< 5

< 7

< 0,7

I

1

level 1

1

no

 

 

 

 

 

 

 

 

6

Image 6
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Control panel Setting electronically Prior to using for the first timeSetting manually Water softenerFilling with dishwasher salt To fillFilling with rinse aid Adjusting the doseRinse aid Deactivation/activation of the rinse aid dispenserLower basket Daily useLoading cutlery and dishes Cutlery basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket With upper basket raised 20 cmUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes Starting a washing programme Frost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Page From the Electrolux Group. The World’s No.1 choice

DX 6452 specifications

The Zanussi DX 6452 is an exceptional dishwasher that combines performance, efficiency, and versatility, making it an ideal choice for households of varying sizes. With its well-thought-out design and advanced features, it aims to streamline the dishwashing process while ensuring sparkling results.

One of the main features of the Zanussi DX 6452 is its impressive capacity. It can accommodate up to 13 place settings in a single load, making it perfect for families or those who frequently entertain guests. The adjustable upper basket allows users to customize the interior space, enabling the accommodation of larger pots or pans alongside regular dinnerware.

In terms of performance, the Zanussi DX 6452 boasts a variety of wash programs tailored to different needs. The Eco setting is designed for energy efficiency, using minimal water and electricity, which not only conserves resources but also lowers utility bills. Other options include intensive washes for heavily soiled dishes and quick cycles for when time is of the essence. The machine also features a half-load option, allowing for flexible washing without wasting resources.

The appliance is equipped with cutting-edge technology that enhances its functionality. The A++ energy rating ensures that it operates with optimal efficiency, reducing the environmental impact while maintaining performance. Additionally, its UltraClean technology targets tough stains, ensuring that even the dirtiest dishes emerge spotless.

Another notable characteristic is the quiet operation of the Zanussi DX 6452. With a noise level of just 47 decibels, it runs quietly in the background, making it suitable for open-plan living spaces or late-night cleaning. The delay start feature allows users to program the dishwasher to run at a more convenient time, such as overnight, to take advantage of off-peak energy rates.

Safety is always a priority in modern appliances, and the Zanussi DX 6452 is no exception. It includes a child lock feature to prevent any accidental operation, providing peace of mind in households with young children.

In summary, the Zanussi DX 6452 stands out for its efficient design and numerous smart features. With impressive capacity, customizable wash programs, and advanced technologies, it delivers reliable performance while promoting eco-friendliness. This dishwasher is an excellent addition to any kitchen, simplifying dishwashing chores and ensuring dishes come out sparkling clean every time.