Zanussi DX 6451 Installation instructions, Fitting under a counter, Levelling, Proceed as follows

Page 20

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Control panel Half load buttonPrior to using for the first time Setting manuallySetting electronically Water softenerFilling with dishwasher salt To fillAdjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Cutlery basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows With upper basket raised 20 cmUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Setting and starting the programme To interrupt or cancel a washing programme in progressStarting a washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Page From the Electrolux Group. The World’s No.1 choice

DX 6451 specifications

The Zanussi DX 6451 is an innovative and versatile clothes dryer designed to simplify the laundry process while ensuring outstanding performance and efficiency. With a sleek and modern design, it offers a spacious drum capacity that can accommodate large loads, making it perfect for families or anyone who frequently does laundry.

One of the standout features of the DX 6451 is its energy efficiency. It is rated with a high energy efficiency class, which means it consumes less electricity compared to traditional dryers, helping users save on their energy bills while also being more environmentally friendly. The machine is equipped with advanced sensor drying technology that detects the moisture level of the clothes and automatically adjusts the drying time accordingly. This not only prevents over-drying, which can damage fabrics, but also optimizes energy consumption.

The DX 6451 also incorporates multiple drying programs designed to meet diverse fabric care needs. Whether it's delicate items, wool, or heavy-duty fabrics, users can choose from a range of settings to ensure the perfect drying results. The availability of quick drying cycles is another practical feature, enabling users to freshen up their laundry in a fraction of the time.

Another noteworthy characteristic of the Zanussi DX 6451 is its user-friendly control panel. The intuitive interface allows for easy program selection and monitoring of the drying process. Additionally, the model is designed with a large door opening for easy loading and unloading of laundry, enhancing user convenience.

For those concerned with fabric care, the DX 6451 includes anti-crease technology that helps minimize wrinkles in clothes, reducing the need for ironing afterward. The machine operates quietly, making it suitable for homes where noise levels must be kept to a minimum.

In terms of maintenance, the dryer features a built-in filter that is easy to access and clean, ensuring optimal performance over time. The design also allows for easy integration into various laundry spaces, contributing to the cohesive organization of home appliances.

Overall, the Zanussi DX 6451 represents a blend of efficiency, advanced technology, and thoughtful design, making it a reliable choice for anyone looking to maximize laundry results with minimal effort. Its combination of features addresses the needs of the modern user while promoting sustainability and fabric care.
Top Page Image Contents