Zanussi DX 6451 manual Water outlet hose connection, Electrical connection

Page 21

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Half load button Control panelSetting manually Prior to using for the first timeSetting electronically Water softenerTo fill Filling with dishwasher saltRinse aid Adjusting the doseFilling with rinse aid Deactivation/activation of the rinse aid dispenserLoading cutlery and dishes Daily useLower basket Cutlery basketUpper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows With upper basket raised 20 cmFill with detergent Use of detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Setting and starting the programmeStarting a washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Page From the Electrolux Group. The World’s No.1 choice

DX 6451 specifications

The Zanussi DX 6451 is an innovative and versatile clothes dryer designed to simplify the laundry process while ensuring outstanding performance and efficiency. With a sleek and modern design, it offers a spacious drum capacity that can accommodate large loads, making it perfect for families or anyone who frequently does laundry.

One of the standout features of the DX 6451 is its energy efficiency. It is rated with a high energy efficiency class, which means it consumes less electricity compared to traditional dryers, helping users save on their energy bills while also being more environmentally friendly. The machine is equipped with advanced sensor drying technology that detects the moisture level of the clothes and automatically adjusts the drying time accordingly. This not only prevents over-drying, which can damage fabrics, but also optimizes energy consumption.

The DX 6451 also incorporates multiple drying programs designed to meet diverse fabric care needs. Whether it's delicate items, wool, or heavy-duty fabrics, users can choose from a range of settings to ensure the perfect drying results. The availability of quick drying cycles is another practical feature, enabling users to freshen up their laundry in a fraction of the time.

Another noteworthy characteristic of the Zanussi DX 6451 is its user-friendly control panel. The intuitive interface allows for easy program selection and monitoring of the drying process. Additionally, the model is designed with a large door opening for easy loading and unloading of laundry, enhancing user convenience.

For those concerned with fabric care, the DX 6451 includes anti-crease technology that helps minimize wrinkles in clothes, reducing the need for ironing afterward. The machine operates quietly, making it suitable for homes where noise levels must be kept to a minimum.

In terms of maintenance, the dryer features a built-in filter that is easy to access and clean, ensuring optimal performance over time. The design also allows for easy integration into various laundry spaces, contributing to the cohesive organization of home appliances.

Overall, the Zanussi DX 6451 represents a blend of efficiency, advanced technology, and thoughtful design, making it a reliable choice for anyone looking to maximize laundry results with minimal effort. Its combination of features addresses the needs of the modern user while promoting sustainability and fabric care.
Top Page Image Contents