During the countdown the only indicator lights illuminate are the programme light and the light of the number of hours to the start of the programme.
Once the delayed time has elapsed the programme will start automatically.
It is possible to stop a countdown in progress or before it starts, simply pressing the DELAY START push button until the indicator lights of the hours are off:
9.To cancel a programme in progress
A programme in progress can be cancelled at any time.
Press for about 3 seconds the push button of the running programme until all indicator lights are off.
Only the
It is now possible to select a new washing programme.
10.At the end of the washing programme
The dishwasher will automatically stop and the phase indicator light end of programme will come on.
The indicator light of the programme just ended will remain on.
The dishwasher has finished the programme only when the phase indicator light end of programme is illuminated. If you do not wait for the end of the programme it will not be possible to start a new programme if first you do not cancel
the previous.
(For instructions on how to cancel a programme see point 9)
Switch off the dishwasher by pressing the ON- OFF push button.
Wait 15/20 minutes before opening the dishwasher’s door; in this way you will avoid burning yourself when removing the dishes and avoid also the damage of the nearby furniture caused by the escape of steam.
Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
Important!
In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
17