Zanussi DE 4744 manual Electrical connection, Earth, Blue, Brown Live, Proceed as follows

Page 25

Electrical connection

This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow	-Earth
Blue	-Neutral
Brown	-Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not

correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the

letter "E" or the earth symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

	3. Connect the Brown (live) wire to the terminal in	CE03
	the plug which is marked with the letter "L" or	CE03
	the plug which is marked with the letter "L" or
	coloured red.
	The plug moulded onto the lead incorporates a
	13amp BSI362 fuse. Only ASTA or BSI fuses should
	be used.
	The plug must not be used if the fuse cover/carrier is
	lost. The cover/carrier is indicated by the coloured
	insert at the base of the product.
	A replacement cover/carrier must be obtained from
	your local Service Force Centre.

This appliance complies with the following E.E.C. Directives:

-73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

25

Image 25

Contents Dishwasher Contents Installation Important safety informationChild Safety During UseUpper basket Description of the applianceSID detergent dispenser WorktopDelay Start push button ON-OFF indicator light ON-OFF push button Door handleIndicator lights Control panelBefore use Setting the water softenerPress Intensive SID Example To change the level, pressIntensive SID 80 programme push button, level 4 is selected Intensive SID 80 programme push button, level 1 is selectedTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container First timeRinse aid Adjusting the doseFilling with rinse aid Washing programmeLoading your appliance Using your applianceLower basket Open the door and slide out the baskets to load the dishesRemovable knife basket Cutlery basketUpper basket Adjusting the height of the upper basketCompact detergents with enzymes Use of detergentTo save energy Hints and tipsFor best washing results Items not suitable for dishwashersWashing programmes Check the filters Operating sequenceLoad the dishes Measure out detergentProgramme in progress can be cancelled at any time To cancel a programme in progressIt is now possible to select a new washing programme PreviousCleaning the filters Internal cleaningCleaner Dishwasher CleanerFrost precautions External cleaningLeave the inside of the machine clean Moving the machineSomething not working Symptom Fault code SolutionCase of malfunction, Protection against floodingHints for test centres Technical specificationsWater supply connections Installation instructionsRemove all packaging before positioning the machine This dishwasher must be plumbed into a cold water supplyWe advise you therefore to remove it Water outlet hose connectionEarth Electrical connectionBlue Brown LiveLevelling Fitting under a counterKitchen worktop or sink 570-600Page From the Electrolux Group. The world’s No.1 choice