Zanussi DA 6153 manual What to do, when, There are problems when operating the dishwasher, Option

What to do, when...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

...there are problems when operating the dishwasher

The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button. Press the On/Off push button to switch the dishwasher off and carry out the following suggested corrective actions.

Malfunction	Possible cause	Solutions
The machine does not fill with	The water tap is blocked or furred with	Clean the water tap.
	limescale.
water.
	The water tap is turned off.	Turn the water tap on.
	The filter (where present) in the threaded hose	Clean the filter in the threaded hose
	fitting at the water inlet valve is blocked.	fitting.
	The water inlet hose has not been correctly laid	Check the water inlet hose connection.
	or it is bent or squashed.
The dishwasher will not drain.	The siphon is blocked.	Clean out the siphon.
	The water drain hose has not been correctly laid	Check the water drain hose connection.
	or it is bent or squashed.
	The dishwasher door has not been properly	Close the door.
	closed.
The programme does not start	The main plug is not plugged in.	Insert the mains plug.
	The fuse has blown in the household fuse box.	Replace the fuse.
	For dishwasher models with delay start	If dishes are to be washed immediately,
	option:	cancel the delay start.
	Delay start has been selected.
There is a whistling noise during	The whistling is not a cause for concern.	Use a different brand of detergent.
washing

Once the checks have been carried out, press the On/Off push button, the programme will continue from the point in which it was interrupted. If the malfunction reappears contact your local Service Force Centre.

8