Zanussi DA 6153 manual Operating sequence, Interrupting a washing programme in progress

Page 6

Operating sequence

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Set and start of the programme

Turn the programme selector dial clockwise until the letter of the programme you wish to select corresponds with the programme marker on the control panel.

If necessary select the temperature of the main wash according to the instructions in the "Washing programmes" chart (see "Required main wash temperature push button").

Depress the On/Off push button.

The On/Off indicator light will come on and the machine will start.

5.Interrupting a washing programme in progress

Interrupt a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off push button (in this case the On/Off indicator light turns off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.

6.End of the washing programme

The dishwasher will automatically stop.

The On/Off indicator light remains on until the On/Off push button is depressed.

Only the On/Off integrated indicator light will remain on. Switch off the dishwasher by pressing the On/Off push button.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

Water may appear on the sides and door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

6

Image 6
Contents Dishwasher Description of the appliance Control panelLower basket Daily useLoading cutlery and dishes Cutlery basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows Washing programmes End of the washing programme Operating sequenceInterrupting a washing programme in progress Unloading the dishwasherLevelling Technical specificationsFitting under a counter Proceed as followsService and Spare Parts Customer Care DepartmentEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsPage Page From the Electrolux Group. The world’s No.1 choice Dishwasher Contents Safety instructionsDisposal Prior to using for the first timeSetting the water softener Water softenerTo fill Adjusting the doseFilling with salt Rinse aidFill with detergent Top up with rinse aid whenUse of detergent Detergent dispenser type aConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFor dishwasher models with delay start There are problems when operating the dishwasherMalfunction Possible cause Solutions What to do, whenDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesInstallation instructions Water supply connectionsWater outlet hose connection Electrical connection Green and Yellow Earth Blue- Neutral Brown- Live05/03